2003 Peugeot 206 Engine Cold Air Intake Performance Kit 4 Cyl 1.6L K&N

  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Free Flowing Aluminum Tube
    • Easy To Install Usually In 90 Minutes or Less
    • Lasts Up To 100000 Miles Before Service Is Required
    • Replaces Entire Factory Air Intake System
    • Washable And Reusable Lifetime Air Filter
    • K&N Million Mile Limited Warranty
  • The K&N 69-7501TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Peugeot 206 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7501TB cold-air intake consists of a K&N high-flow air filter that mounts near the driver side wheel well directing outside air through the free-flowing aluminum tubing. High volumes of clean air are delivered into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Additional Fitment Information:
Vehicle Block CC Engine CID
2003 Peugeot 206 L 1587 4 Cyl 1.6L 97
Brand K&N
Part # 69-7501TB
Condition New
Warehouse C

K&N

  • Performance Air Intake System
  • ; California Air Resources Board Exempt: No; 69 Series - Metal Intake Kit for Sport Compact & Sports Car; Blue (CCA)
  • K/N s easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a blue powder coat finish.
  • K&N Engineering, Inc. provides reusable cotton gauze filter technology products for automotive applications. Its products include air filters, such as stock replacement air filters and universal air filters; intake kits, including air intake systems, injection performance kits, and high flow intake kits; and oil filters and marine oil filters. The company also offers various performance products and accessories, such as filter wraps, cleaning accessories, custom assemblies and lids, top air filters, crankcase vent filters, covered crankcase vent filters and valve cover adapters, flow control air filter assemblies, filter minder, and marine products. In addition, it offers various accessories, including carbon fiber composites; snowmobile products; off-road, UMP air box, and VW carburetor air filters; fuel injection air boxes; injector stack filters; kart filters; plenums and weber adapter; custom air cleaners; industrial and small engine air filters; fuel injection line air filters; air horns; air filter accessories; scoop air filters and cone air filters; air/fuel ratio monitors; flywheel/rotor pullers; and fuel filters. The company offers its products to automotive, motorcycle, marine, industrial, and military markets. K&N Engineering, Inc. was founded in 1969 and is headquartered in Riverside, California with an additional office in Warrington, United Kingdom; and the Netherlands.

    General

    Oil Included
    Filter Is Pre-oiled
    Air Filter Height
    5.000 In. (127mm)
    Clamp Style
    Regular
    Coupler Color
    Black
    Mounting Hardware Included
    Yes
    WARNING CA Proposition 65
    Yes
    California Restricted
    Not Legal For Sale Or Use In California
    TUV Approved (Europe)
    No
    Intake Pipe Inlet Shape
    Round
    Replacement Filter
    Ru-9630
    Item Weight
    6.200 Lbs. (2.8 Kg)
    Product Box Height
    8.500 In. (216mm)
    Filter Material
    Cotton Gauze
    Air Filter Outlet Shape
    Round
    Product Box Width
    14.500 In. (368mm)
    Air Filter Outlet Length
    2.500 In. (64mm)
    Product Box Length
    18.250 In. (464mm)
    System Type
    Complete Cold Air
    Clamp Quantity
    5
    Air Filter Large End Diameter
    4.500 In. (114mm)
    Intake Pipe Outlet Shape
    Round
    Intake Pipe Color
    Blue
    Clamp Color
    Natural
    Clamp Material
    Stainless Steel
    Mass Air Flow Sensor Included
    Mass Air Flow Sensor Adapter Included When Required
    WARNING CA Proposition 65 Message
    Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    Intake Pipe Material
    Aluminum
    Air Filter Outlet Width
    2.500 In. (64mm)
    Intake Pipe Inlet Length
    18.500 In. (470mm)
    Air Filter Element Washable
    Yes
    Couplers Included
    2
    Package Material
    Paperboard
    Intake Pipe Inlet Width
    2.500 In. (64mm)
    Intake Pipe Outlet Length
    18.000 In. (457mm)
    Filter Color
    Red
    Package Type
    Box
    Air Box Included
    No
    Street Legal
    No
    Intake Pipe Outlet Width
    2.500 In. (64mm)

    Packaging

    bar code
    024844110305
    package quantity
    1
    length
    18.25 in
    width
    14.50 in
    height
    8.50 in
    weight
    6.15 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.

    Loading...