2015 Ford F 150 Air Intake Kit Parts

Choose your Submodel for your 2015 Ford F-150


Showing 1 - 10 of 27 products
Image
SKU
Product
Rating
Price

Corsa
  • Closed Box
  • Oiled; For Use w/Filter PN[5161];Not Legal For Sale Or Use In California
  • Closed Box Air Intake With MaxFlow 5 Oiled Filter
  • Pro5 Closed Box Air Intake System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
      • Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Designed For Performance
    • Outflows Stock Air Intake
    • Free Flowing
    • Built Rugged And Designed To Protect The Filter
    • Smoked Acrylic See-Through Airbox Lid
    • Easy Bolt On Installation - Installs in Under 1 Hour
    • Lifetime Warranty
    • Made In The USA
  • CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, CORSA Performance has you covered.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2015 - Ford F-150 V 4951 8 Cyl 5.0L Lariat 302

Corsa
  • For Use w/Filter PN[61513];Not Legal For Sale Or Use In California
  • PowerCore® Closed Box Air Intake System

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 3496 6 Cyl 3.5L 213

Corsa
  • For Use w/Filter PN[61513];CARB Pending
  • PowerCore® Closed Box Air Intake System

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V - 6 Cyl 2.7L 164

Corsa
  • Closed Box
  • Oiled; For Use w/Filter PN[5161];Not Legal For Sale Or Use In California
  • Closed Box Air Intake With MaxFlow 5 Oiled Filter
  • Pro5 Closed Box Air Intake System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Designed For Performance
    • Outflows Stock Air Intake
    • Free Flowing
    • Built Rugged And Designed To Protect The Filter
    • Smoked Acrylic See-Through Airbox Lid
    • Easy Bolt On Installation - Installs in Under 1 Hour
    • Lifetime Warranty
    • Made In The USA
  • CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volant's high performance MaxFlow 5, 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, CORSA Performance has you covered.

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 4951 8 Cyl 5.0L 302

Corsa
  • Dry; For Use w/Filter PN[5160];CARB Pending
  • Drytech 3D Closed Box Air Intake

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2015 - Ford F-150 V - 6 Cyl 2.7L Lariat 164

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 19.37 HP At 4500 RPM;Off-Road Use Only
  • K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • 63 Series Aircharger Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 6.500 In. (165mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 19.37 Hp @ 4500 Rpm
    • California Restricted: Not Legal For Sale Or Use In California
    • TUV Approved (Europe): No
    • Replacement Filter: Ru-1042
    • Item Weight: 10.900 Lbs. (4.9 Kg)
    • RPM: 4500
    • Product Box Height: 14.500 In. (368mm)
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Product Box Width: 15.500 In. (394 Mm)
    • Air Filter Outlet Length: 6.000 In. (152mm)
    • Product Box Length: 24.100 In. (612mm)
    • Clamp Quantity: 7
    • Intake Pipe Color: None
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: High-density Cross-linked Polyethylene
    • Air Filter Outlet Width: 6.000 In. (152mm)
    • Horse Power Increase: 19 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Alternate Replacement Filter: Rf-1042
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: No
  • Features:
    • Guaranteed Horsepower Gain
    • Designed To Improve Throttle Response And Engine Sound
    • Easy To Install
    • Replaces Entire Factory Air Intake System
    • Lasts Up To 100 000 Miles Before Service Required
  • A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

This Part Fits the Following OEM/Substitute Numbers:
572593

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2015 - Ford F-150 V - 6 Cyl 2.7L Lariat 164

K&N
  • Round; Black Non-Woven Synthetic Air Filter; Natural Stainless Steel Clamp; Estimated Horse Power Gain 8.44 HP At 4868 RPM;Not Legal For Sale Or Use In California
  • K/N s easy to install air intake system replaces the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s No-Hassle Lifetime limited warranty.
  • Performance Air Intake System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Prop 65 (C, R or CR): Cr
  • Features:
    • Guaranteed To Increase Horsepower And Torque
    • Mandrel-Bent Aluminum Intake Tube Paired
    • Oversized Oiled Cotton Air Filter
    • Engineered To Provide High Airflow And Exceptional Filtration
    • Replaces Factory Air Filter And Intake Tube
    • 10-Year/Million Mile Limited Warranty
  • The KN DRYFLOW Air Intake System replaces your vehicle's restrictive factory air filter and air intake housing. KN intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine's throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 4951 8 Cyl 5.0L 302

Injen
  • Includes 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; Gains +11.0 HP/Torque +11.0 ft. lbs.; Polished
  • Power-Flow Air Intake System; Includes 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; Gains +11.0 HP/Torque +11.0 ft. lbs.; Polished;
  • Power-Flow Air Intake System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black & Cobalt; Which Are Known To The State Of California To Cause Cancer; And (antimony [oxide]; Arsenic; Beryllium. Chromium (hexavalent); Cobalt Cadmium; Lead; And Nickel Whi
  • Features:
    • 4 in. And 3.5 in. Dual Tuned Intakes
    • MR Technology Patented Tuning Process
    • SuperNano-Web Dry Filter X-1078/79
    • Increased HP up to 11
    • Increased Torque Up To 24ft./lbs.
    • 6061-T6 Aluminum Intake Tubing
    • Aggressive Engine Tone Under Full Throttle
    • Smooth Intake Piping Eliminates Restrictions/Improves Airflow
    • Made In Pomona California USA
    • Injen Technology Limited Lifetime Warranty
  • Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you're in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your horsepower desires. The Injen PF cold air intakes have dyno proven power gains that don't lie. The 6061-T6 aluminum tubing offers superior airflow and styling, plus it's available with multiple finish options, allowing you to choice on the finished look inside your engine bay. Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 3496 6 Cyl 3.5L 213

Injen
  • Includes 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; Gains +11 HP/Torque +11 ft. lbs.; Wrinkle Black
  • Power-Flow Air Intake System; Includes 4 in. And 3.5 in. Dual Intake Tubing/Filter/Heat Shield/Hardware/Instruction; w/MR Technology; Gains +11 HP/Torque +11 ft. lbs.; Wrinkle Black;
  • Power-Flow Air Intake System
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: This Product Can Expose You To Chemicals Including Chromium; Nickel; Carbon Black; Bisphenol A/epichclorohydrin Polmer & Cobalt; Which Are Known To The State Of California To Cause Cancer; And (antimony [oxide]; Arsenic; Beryllium. Chromium (hexavalent);
  • Features:
    • 4 in. And 3.5 in. Dual Tuned Intakes
    • MR Technology Patented Tuning Process
    • SuperNano-Web Dry Filter X-1078/79
    • Increased HP up to 11
    • Increased Torque Up To 24ft./lbs.
    • 6061-T6 Aluminum Intake Tubing
    • Aggressive Engine Tone Under Full Throttle
    • Smooth Intake Piping Eliminates Restrictions/Improves Airflow
    • Made In Pomona California USA
    • Injen Technology Limited Lifetime Warranty
  • Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you're in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your horsepower desires. The Injen PF cold air intakes have dyno proven power gains that don't lie. The 6061-T6 aluminum tubing offers superior airflow and styling, plus it's available with multiple finish options, allowing you to choice on the finished look inside your engine bay. Injen likes to keep things cool, so the air filter is positioned in the best possible location to keep that unwanted hot air from entering your intake. This helps drop air intake temperatures and feed cool, dense air to that hungry engine. This Injen PF intake kit includes everything that is required for a direct-fit installation. Just like all of Injen's cold air intake systems, this PF Cold air Intake kit includes the unbeatable Injen limited Lifetime Warranty. Rest assured that all of your Injen parts are performing perfectly for as long as you own them!

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 3496 6 Cyl 3.5L 213

K&N
  • Performance Air Intake System
  • Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.39 HP At 4553 RPM;CARB E.O. D-269-64
  • K/N Blackhawk Induction cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
  • Blackhawk Air Induction Kit
  • Product Attributes:
    • Oil Included: No Filter Oil Required
    • Air Filter Height: 6.000 In. (152mm)
    • Clamp Style: Regular
    • Coupler Color: Black
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 11.39 Hp @ 4553 Rpm
    • TUV Approved (Europe): No
    • Intake Pipe Inlet Shape: Round
    • Replacement Filter: Ru-3102hbk
    • Item Weight: 11.200 Lbs. (5.1 Kg)
    • RPM: 4553
    • Product Box Height: 10.500 In. (267mm)
    • Filter Material: Non-woven Synthetic
    • Air Filter Outlet Shape: Round
    • Product Box Width: 13.250 In. (337mm)
    • Air Filter Outlet Length: 1.000 In. (25mm)
    • Product Box Length: 35.500 In. (902mm)
    • Clamp Quantity: 7
    • Intake Pipe Outlet Shape: Round
    • Intake Pipe Color: Textured Black
    • Clamp Color: Black
    • Clamp Material: Steel
    • Mass Air Flow Sensor Included: No Mass Air Flow Sensor Adapter Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: Aluminum
    • Air Filter Outlet Width: 5.250 In. (133mm)
    • Horse Power Increase: 11 Hp
    • Intake Pipe Inlet Length: 27.000 In. (686mm)
    • Air Filter Element Washable: Yes
    • Couplers Included: 2
    • Package Material: Paperboard
    • Intake Pipe Inlet Width: 3.500 In. (89mm)
    • Intake Pipe Outlet Length: 27.000 In. (686mm)
    • Filter Color: Black
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Intake Pipe Outlet Width: 3.500 In. (89mm)
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Washable And Reusable Air Filter
    • Made From All Black Components
    • Lasts Up To 100 000 Miles Before Service
    • Easy To Install
    • Million Mile Limited Warranty
  • Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Additional Fitment Information:
Vehicle Block CC Engine CID
2015 - Ford F-150 V 4951 8 Cyl 5.0L 302
Showing 1 - 10 of 27 products

Loading...