Toyota C HR Parts

Choose a Year for your Toyota C-HR


Showing 1 - 10 of 1054 products
Image
SKU
Product
Rating
Price

Dayco
  • Excludes Japan Built Vehicle
  • Product Attributes:
    • Cross Section: K-section
    • Top Width: .82
    • Rib Profile: Straight Rib
    • Outside Circumference:
      • 1223.27
      • 48.16
    • Rib Depth: Standard
    • Standards: Sae J1459, Sae J2432
    • Effective Length:
      • 1206.50
      • 47.50
    • Minimum Operating Temperature:
      • -42.7
      • -45
    • 381: 6
    • Maximum Operating Temperature:
      • 100
      • 212

This Part Fits the Following OEM/Substitute Numbers:
01-23683-000, 01-23683-001, 11720-ED80B, 11720-EL00A, 11720-ET00A, 12578001, 1340A086, 1340A132, 20-5764, 2500486-C1, 3517822-C1, 3565421-C1, 3571275-C1, 4060475, 475K6, 6K474, 6K475, 6PK1205...VIEW MORE

Additional Fitment Information:
Vehicle
2020 - Toyota C-HR

Trico
  • 14" TRICO Exact Fit Wiper Blade (Rear)
  • Roc Lock 2
  • TRICO Exact Fit
  • Provides critical rear visibility in today's aggressive driving environment

Additional Fitment Information:
Vehicle Position
2020 - Toyota C-HR Rear

Schrader
  • ; Aluminium Valve Aluminum valve Replaces EZ-sensor rubber valve TPMS service kit for EZ-sensor Torque: 62in-lbs , 7N.m
  • Programmable TPMS EZ-Sensor Service Pack
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle
2019 - Toyota C-HR

Motorad
  • Fuel Cap
  • Vented Black Cap
  • Standard
  • Product Attributes:
    • Vented: Yes
    • Lockable: No
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2019 - Toyota C-HR L 1987 4 Cyl 2.0L 121

Fram
  • FRAM, CH10358, Oil Filter
  • Cartridge Oil Filter Cartridge filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 0.560
    • Inner Diameter Bottom: 1.110
    • Non Slip Grip: No
    • Gasket Thickness: 0.156
    • Torque Nut: No
    • Inside Diameter Top: 1.110
    • Gasket Material: Gasket (1) Gasket 1
    • Gasket Type: Gasket & O-ring
    • Marine Approved: No
    • Outside Diameter: 2.390
    • Gasket Outside Diameter: 2.000
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: No
  • FRAM Extra Guard® Oil Filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
11 42 1 253 919, 1210031-T0301, 30750013, HP-7016, KN-401, LF609, P149

Additional Fitment Information:
Vehicle
2021 - Toyota C-HR

Fram
  • Flexible Panel Air Filter
  • Extra Guard

Additional Fitment Information:
Vehicle
2019 - Toyota C-HR

Fram
  • FRAM, PH4967, Oil Filter
  • Spin-on Oil Filter Spin-on
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.210
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.205
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 350.000
    • Gasket Material: Base
    • Gasket Type: Base
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 14.000
    • Marine Approved: No
    • Outside Diameter: 2.688
    • Gasket Outside Diameter: 2.480
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
32 00 5769, CAS6607, M1-108, ML16825, PH7025, PS-2004, PZ-37

Additional Fitment Information:
Vehicle
2021 - Toyota C-HR

Fram
  • CARTRIDGE OIL FILTER, DEFENSE
  • Cartridge filter Cartridge Oil Filter DEFENSE

Additional Fitment Information:
Vehicle
2020 - Toyota C-HR

Prestone
  • Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
  • Extended Life, Full Strength Concentrate
  • Product Attributes:
    • Biodegradable: No
    • California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
    • Freezing Point: -34
    • Recommended Dilution Ratio: 5 To 7
    • Phosphate Free: Yes
    • Ethylene Glycol: Yes
    • Boiling Point at 50 50 Mixture: 229
  • Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
  • This item must be purchased in quantities of 6

Additional Fitment Information:
Vehicle
2020 - Toyota C-HR

Moog
  • Camber Adjusting Kit
  • From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 17 (mm) Bolts
  • MOOG K90477 Camber Adjusting Kit
  • Features:
    • Can bring vehicles back to factory specification
    • Can solve excessive tire wear and steering issues
    • Shims and bushings provide precise camber, caster and toe adjustments
    • Incorporates proven design and engineering features
    • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
13325A, 264-3645, 41217, 45K18039, 616-1039, 6161028, 756501, AA3645, MS86017, VV13325A

Additional Fitment Information:
Vehicle Position
2021 - Toyota C-HR Front
Showing 1 - 10 of 1054 products

Loading...