1980 Chevrolet Camaro Accel Parts

Choose your Engine for your 1980 Chevrolet Camaro

6 Cyl 3.8L 8 Cyl 4.4L 8 Cyl 5.0L 8 Cyl 5.7L

Showing 1 - 10 of 17 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1980 Chevrolet Camaro Spark Plug Wire Set 8 Cyl 4.4L Accel

Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots
Custom Fit Spark Plug Wire Set; Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots;
Custom Fit Spark Plug Wire Set
Product Attributes:
- Wire Diameter: 8.8mm
- Wire Series: 8.8mm Wire
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: No
- Core Type: Spiral
- Boot Type: Oem
- Wire Temperature Rating: 550 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: 500 Ohms Per Ft.
- Boot Angle: 90 Degree
Features:
- 500 Ohms/ft. Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 4.4L	267

1 In Stock

$203.14 CAD

$243.77 CAD

Brand	Accel
Part #	A358848ACC
Condition	New
Warehouse	B

1980 Chevrolet Camaro Ignition Control Module 6 Cyl 3.8L Accel

HEI 4 Pin Module;CARB E.O. D-221-4
Distributor Control Module; HEI 4 Pin Module;
Distributor Control Module
Product Attributes:
- WARNING CA Proposition 65: No
- RPM: Oem
Features:
- Fits Most Stock And Modified Distributors
- Solid State Electronics
- Dwell Control Circuit
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	3800	6 Cyl 3.8L	231

1 In Stock

$111.69 CAD

$134.03 CAD

Brand	Accel
Part #	A3535361
Condition	New
Warehouse	B

1980 Chevrolet Camaro Distributor 8 Cyl 4.4L Accel

HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;O.E.M. Replacement Part
Performance Distributor; HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;
Performance Distributor
Product Attributes:
- Distributor Type: Hei/breakerless
- WARNING CA Proposition 65: No
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (265-350)
Features:
- Distributor Cap w/Brass Terminals
- All New Cast Aluminum Housings For Durability
- OEM Style Ignition Modules For Trouble-Free Service
- High-Quality Distributor Gears
- Long Sintered Bushings For Long Life
ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesnt break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 4.4L	267

23 In Stock

$186.61 CAD

$223.93 CAD

Brand	Accel
Part #	A3559130
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug 8 Cyl 5.0L Accel

14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;0.045 in. Plug Gap
U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;
U-Groove Spark Plug Header Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 5.0L	305

45 In Stock

$85.50 CAD

$102.60 CAD

Brand	Accel
Part #	A368199
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug 8 Cyl 5.0L Accel

Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];0.045 in. Plug Gap
HP Copper Spark Plug; Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];
HP Copper Spark Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
Features:
- Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
- Copper Dissipates Heat Much Better Than Other Materials
- C-Cut Design/Un-Shrouding The Spark Kernel
- Gapable Unlike Iridium Or Platinum
- Machine Rolled Threads-Precise Thread Engagement
- Stock Heat Range
- On The Street Or Strip
- Accel Hp Copper Core Spark Plugs Deliver!
ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 5.0L	305

8 In Stock

$71.52 CAD

$85.82 CAD

Brand	Accel
Part #	A368179
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug 6 Cyl 3.8L Accel

14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.045 in. Plug Gap
U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
U-Groove Spark Plug Header Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 4
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Improves Spark Plug Access To Fit Socket Or Wrench
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	6 Cyl 3.8L	229

4 In Stock

$59.81 CAD

$71.77 CAD

Brand	Accel
Part #	A360576S-4
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug Wire Set 8 Cyl 4.4L Accel

Black; 8mm; Graphite Core; 90 Deg. Boots
Universal Fit Spark Plug Wire Set; Black; 8mm; Graphite Core; 90 Deg. Boots;
Universal Fit Spark Plug Wire Set
Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: 90 Degree
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: 90 Degree
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 4.4L	267

12 In Stock

$98.03 CAD

$117.64 CAD

Brand	Accel
Part #	A354041K
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug Wire Set 8 Cyl 4.4L Accel

Yellow Wire; 8mm; Graphite Core; 90 Deg. Boots
Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; 90 Deg. Boots;
Universal Fit Spark Plug Wire Set
Product Attributes:
- Wire Diameter: 8mm
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
- Boot Angle: 90 Degree
- Wire Series: Superstock
- Core Type: Carbon Graphite
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	-	8 Cyl 4.4L	267

4 In Stock

$101.53 CAD

$121.84 CAD

Brand	Accel
Part #	A354041
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug 6 Cyl 3.8L Accel

14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.030 in. Plug Gap
U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
U-Groove Spark Plug Header Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 4
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Improves Spark Plug Access To Fit Socket Or Wrench
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Chevrolet Camaro	V	3800	6 Cyl 3.8L	231

4 In Stock

$59.81 CAD

$71.77 CAD

Brand	Accel
Part #	A360576S-4
Condition	New
Warehouse	B

1980 Chevrolet Camaro Spark Plug Wire Set 8 Cyl 4.4L Accel

Blue; 8mm; Graphite Core; 90 Deg. Boots
Universal Fit Spark Plug Wire Set; Blue; 8mm; Graphite Core; 90 Deg. Boots;
Universal Fit Spark Plug Wire Set
Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: Yes
- Core Type: Carbon Graphite
- Boot Type: 90 Degree
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Resistance: Meets Or Exceeds Oe
- Boot Angle: 90 Degree
Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- Limited 90 Day Warranty
ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.