1980 Pontiac Laurentian Accel Parts

Choose your Engine for your 1980 Pontiac Laurentian

6 Cyl 3.8L 8 Cyl 4.4L 8 Cyl 5.0L 8 Cyl 5.7L

Showing 1 - 4 of 4 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1980 Pontiac Laurentian Ignition Coil 6 Cyl 3.8L Accel

HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;CARB E.O. D-221-6
SuperCoil Ignition Coil; HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;
SuperCoil Ignition Coil
Product Attributes:
- Peak Increase in Voltage: 18%
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Maximum Voltage: 45000
- Primary Resistance: .500 Ohms
- Package Quantity: 1
- Secondary Resistance: 8.6k Ohms
Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Pontiac Laurentian	V	-	6 Cyl 3.8L	229

2 In Stock

$162.49 CAD

$194.99 CAD

Brand	Accel
Part #	A35140003
Condition	New
Warehouse	B

1980 Pontiac Laurentian Spark Plug 8 Cyl 5.7L Accel

Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];0.040 in. Plug Gap
HP Copper Spark Plug; Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];
HP Copper Spark Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
Features:
- Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
- Copper Dissipates Heat Much Better Than Other Materials
- C-Cut Design/Un-Shrouding The Spark Kernel
- Gapable Unlike Iridium Or Platinum
- Machine Rolled Threads-Precise Thread Engagement
- Stock Heat Range
- On The Street Or Strip
- Accel Hp Copper Core Spark Plugs Deliver!
ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Pontiac Laurentian	V	-	8 Cyl 5.7L	350

8 In Stock

$71.52 CAD

$85.82 CAD

Brand	Accel
Part #	A368179
Condition	New
Warehouse	B

1980 Pontiac Laurentian Spark Plug 8 Cyl 5.7L Accel

14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;0.040 in. Plug Gap
U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;
U-Groove Spark Plug Header Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1980 - Pontiac Laurentian	V	-	8 Cyl 5.7L	350

45 In Stock

$85.50 CAD

$102.60 CAD

Brand	Accel
Part #	A368199
Condition	New
Warehouse	B

1980 Pontiac Laurentian Spark Plug 8 Cyl 5.7L Accel

14mm Thread; .460 in. Reach; Heat Range 6; Each;0.040 in. Plug Gap
U-Groove Copper Spark Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Each;
U-Groove Copper Spark Plug
Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 1
Features:
- Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
- Copper Dissipates Heat Much Better Than Other Materials
- C - Cut Design Un-shrouds The Spark Kernel For Better Burn
- Unlike Iridium Or Platinum Plugs
- The Accel Hp Plugs Are Gapable
- Machined Rolled Threads For Precise Thread Engagement
- Stock Heat Range
- Whether Using On Street/Strip The HP Copper Core Plugs Deliver!
Made with a Copper Core Which is a Better Conductor than Platinum and Iridium. Delivers a Stronger Spark Especially in High Performance Application Where High Combustion Pressures Are Present. Copper is Much Better at Dissipating Heat Than Other Materials Which Lessons the Chance of a Misfire. Gapable Allowing You to Open the Gap Exposing a Larger Flame Kernel or Close it if Needed For High Boost Applications. All ACCEL HP Spark Plugs Have Machine Rolled Threads Allowing For a More Precise Thread Engagement and Torque Retention.