1999 Jeep Wrangler JKS Manufacturing Parts

Showing 1 - 10 of 14 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1999 Jeep Wrangler Suspension Track Bar Relocation Kit - Rear JKS Manufacturing

Rear Track Bar Relocation Bracket
Not compatible with right hand drive vehicles Requires 3.0 in. suspension lift or greater Vehicle must be equipped with CV-type driveshaft
Rear Track Bar Relocation Bracket | Wrangler TJ and LJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Rear Track Bar Relocation Bracket
Features:
- Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing
- Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft
- Premium steel construction is laser cut, formed and folded for maximum strength
- Economical bolt-on solution minimizes risk of track bar failure on the trail
- Protective powder coat finish resists corrosion
Correct Jeep Wrangler TJ or LJ rear suspension geometry with a JKS Rear Track Bar Relocation Bracket. The design compensates for improper track bar alignment / orientation after adjusting rotation of the axle housing. Requires at least a 3 inch suspension lift. Correction improves driveline angles after suspension has been lifted and a CV-type driveshaft installed. The heavy duty steel bracket attaches directly to factory track bar mount on your Jeep's axle housing. It relocates the mounting point 4.0 in. higher to reduce track bar operating angle and improve handling at speed. Eliminates binding and premature bushing wear. Minimizes risk of track bar failure. Protective powder coat finish resists corrosion.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Rear	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS160
Condition	New
Warehouse	B

UPC: 814897010376

1999 Jeep Wrangler Suspension Track Bar - Front JKS Manufacturing

Adjustable Front Track Bar
Not compatible with right hand drive vehicles 4"+ Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
Adjustable Front Track Bar | 4"+ Lift | Wrangler TJ & LJ, Cherokee XJ & Comanche MJ, Grand Cherokee ZJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Front	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS125
Condition	New
Warehouse	B

UPC: 814897010291

1999 Jeep Wrangler Suspension Strut Bumper Stop Extension Kit JKS Manufacturing

Adjustable Bump Stop Extensions
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Adjustable Bump Stop Extensions
Features:
- Adjustable design ensures correct bump stop clearance for virtually any application
- Conveniently allows changes to bump stop clearance without removing coils from vehicle
- Easily compensates for vehicle changes, spring settling and sagging
- Ensures proper bump stop operation to prevent suspension from bottoming out
- Practical upgrade for inferior bump stop extensions and fixed-length designs
- Three unique sizes provide six possible lengths ranging from 3/4" to 4
Increase your Jeep Wrangler TJ or LJ off-road performance with stackable rear bump stop spacers. This variable height landing pad spacer system ensures correct bump stop clearance for virtually any lift and tire combination. Includes three interlocking and interchangeable spacers. This solution allows you to tune for shock length, tire clearance, suspension bind and prevents damage to components from improper geometry. Conveniently allows for changes to bump stop clearance without removing coils from vehicle. It’s a practical upgrade for inferior bump stop extensions and fixed-length designs six possible length combinations - 0.75”, 1.25”, 2.00”, 2.75”, 3.25” 4.00”.

Additional Fitment Information:

Vehicle	Region
1999 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS1100
Condition	New
Warehouse	B

UPC: 814897010642

1999 Jeep Wrangler Suspension Body Lift Kit JKS Manufacturing

1.25" Body Lift
1.25" Body Lift | Wrangler TJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: 1.25" Body Lift
Features:
- Premium grade body lift kit provides 1.25 in. additional tire clearance without affecting spring rate or suspension geometry
- Raises vehicle body relative to chassis and drivetrain for minimal effect on center of gravity
- Vehicle specific design ensures proper fitment and safe, dependable operation
- Dura-Thane poly spacers encapsulate OE body mounts for ultra secure installation
- Includes soft urethane grill supports to prevent it from cracking under stress
- Easy to install kit includes all hardware necessary for each application
- Requires no modifications to fuel tank, air conditioning, radiator, or brakes, unlike other lift kits
JKS makes it easy to lift your Jeep TJ body 1.25" for increased tire clearance. As opposed to a suspension lift kit, a body lift consists of puck-shaped spacers that raise the vehicle body in relation to the frame. Includes pucks and hardware. Bolt-on installation. Vehicle specific design ensures proper fitment and safe, dependable operation. Dura-Thane poly spacers encapsulate OE body mounts for ultra-secure installation. Includes soft urethane grill supports to prevent it from cracking under stress. Easy to install kit includes all hardware necessary for each application. Requires no modifications to fuel tank, air conditioning, radiator, or brakes.

Additional Fitment Information:

Vehicle	Region
1999 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS9904
Condition	New
Warehouse	B

UPC: 814897010277

1999 Jeep Wrangler Suspension Stabilizer Bar Link Kit - Rear JKS Manufacturing

Rear Adjustable Sway Bar Links
Not compatible with aftermarket sway bars 2.5-6" Lift Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle
Rear Adjustable Sway Bar Link | Wrangler TJ and LJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- Installation Time: 1-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 15.00
- Title: Rear Adjustable Sway Bar Links
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Rear	United States

Brand	JKS Manufacturing
Part #	J46JKS2942
Condition	New
Warehouse	B

1999 Jeep Wrangler Suspension Track Bar - Front JKS Manufacturing

Adjustable Front Track Bar
Not compatible with right hand drive vehicles 1-3.5" Lift Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference
Adjustable Front Track Bar | 1"-3.5" Lift | Wrangler TJ & LJ, Cherokee XJ, Comanche MJ, Grand Cherokee ZJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- Installation Time: 2-3
- Installation Difficulty: Moderate
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Front	United States

Brand	JKS Manufacturing
Part #	J46JKSOGS126
Condition	New
Warehouse	B

UPC: 814897010307

1999 Jeep Wrangler Suspension Shock Absorber Conversion Kit - Front Lower JKS Manufacturing

Shock Bar Pin Eliminator
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Shock Bar Pin Eliminator
Features:
- Heavy duty replacement for bar pin style shock mount prevents transfer of noise and vibration caused by bushing movement
- Preloads shock absorber bushing to proper specifications for better performance and longevity
- Bushing surfaces machined smooth for reduced friction and wear
- Retains original mounting alignment to prevent stress on shock absorber and bushing
- Provides almost 1/2 in. additional down travel at shock absorber
- Zinc plated, premium grade steel components for corrosion resistance
- Compatible with OE and aftermarket shock absorbers
Eliminate a common weak link on your Jeep Wrangler TJ or LJ, by upgrading the front lower shock mounts with JKS bar pin eliminators. The standard bar pin design used by most manufacturers provides no lateral support of the shock absorber bushings. Excessive movement between the parts causes the bushings to distort, instead of deflecting impacts to the shock absorber as intended. As the bushings lose their integrity, annoying "thumping" or "rattling" sounds are often heard, and even felt, inside the vehicle cabin. This solution provides a heavy duty cross pin and mount blocks to convert the shock mounting to a standard EB1 eyelet. The design prevents the transfer of noise and vibration caused by bushing movement. Shock absorber bushings are preloaded for better performance and longevity. Machined bushing surfaces reduce friction and wear. Retains the original mounting alignment to prevent stress on shock absorber and bushing. Provides almost 1/2 in. of additional down travel at shock absorber. Manufactured from premium grade steel and Zinc-coated for corrosion resistance. Compatible with OE and aftermarket shock absorbers.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Front Lower	United States

Brand	JKS Manufacturing
Part #	J46JKS9603
Condition	New
Warehouse	B

1999 Jeep Wrangler Suspension Shock Absorber Mounting Kit - Front Upper JKS Manufacturing

Shock Mount Conversion Kit
Compatible with most racing shock absorbers using 0.50 in. ID spherical bearings
Shock Mount Conversion Kit | Front Upper - Bearing Type | Wrangler JK, TJ, & YJ, Cherokee XJ, Grand Cherokee WJ and ZJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Shock Mount Conversion Kit
Features:
- Heavy duty bracket converts factory stem-type shock mount to accept professional off-road racing shock absorbers
- Utilizes proper mounting hardware to accommodate 12mm or 1/2 in. ID x 5/8 in. wide spherical rod bearings
- Massive 7/8 in. mounting stud provides unbeatable strength and security
- High clearance alloy bearing spacers ensure unrestricted shock movement
- Relocates upper shock mount 1.10 in. lower for easy access and additional droop
- Zinc plated finish and hardware ensure long-lasting protection
Upgrade the front upper shock mounts of your Jeep Grand Cherokee WJ or ZJ while gaining almost a ½” of shock absorber down travel with this JKS bar pin eliminator kit. This solution provides heavy duty cradle for bar pin-style shock mounts. There are numerous benefits. The design eliminates the transfer of noise and vibration caused by bushing movement and cradles the shock absorber bushing to proper for better performance and longevity. Machined bushing surfaces reduce friction and wear. Retains the original mounting alignment to prevent stress on shock absorber and bushing. Manufactured from premium grade steel and Zinc-coated for corrosion resistance. Compatible with OE and aftermarket high performance shock absorbers. Bolt-on design. Sold in pairs.

Additional Fitment Information:

Vehicle	Position	Region
1999 - Jeep Wrangler	Front Upper	United States

Brand	JKS Manufacturing
Part #	J46JKS9605
Condition	New
Warehouse	B

1999 Jeep Wrangler License Plate Bracket JKS Manufacturing

Spare Tire License Plate Mount
Requires additional wiring for license plate light installation
Spare Tire License Plate Mount | Wrangler YJ, TJ, LJ and JK
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Spare Tire License Plate Mount
Features:
- Relocates license plate to the center of the spare tire, mounted off of the existing spare tire mount studs
- Works with stock and most aftermarket spare tire mounts
- Eliminates the factory plastic license plate mount
- Laser cut and CNC formed using 10 gauge steel
- Durable gloss black powder coat
- Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs
Relocate your JK, TJ, YJ Jeep Wrangler’s license plate to the center of the spare tire. A solution for aftermarket bumpers without license plate provisions it also eliminates potential damage typical in the stock position. Made from heavy duty, laser cut 10 ga. steel and powder coated. Includes high-quality waterproof polycarbonate license plate light with 2 high power SMD LEDs. Can be used on other applications with 5 on 4.5” or 5 on 5” lug patterns and a wheel hub diameter of at least 1.75". Works great!

Additional Fitment Information:

Vehicle	Region
1999 - Jeep Wrangler	United States

Brand	JKS Manufacturing
Part #	J46JKS8211
Condition	New
Warehouse	B

UPC: 814897011816

1999 Jeep Wrangler Engine Mount Spacer Kit JKS Manufacturing

Budget Motor Mount Lift
Compatible with 4.2L, 4.0L or 2.5L engine only
Budget Motor Mount Lift | Wrangler YJ / TJ
Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Title: Budget Motor Mount Lift
Features:
- Simple, unique 1 in. spacer raises OE front motor mounts on chassis
- Improves rear driveline angles by tilting transfer case output shaft towards the rear axle
- Re-aligns engine fan with radiator shroud for maximum cooling efficiency
- Provides the benefits of raised motor mounts while retaining the soft OE rubber bushings for maximum vibration absorption
- Machined from a solid block of premium T061-T6 aluminum alloy and anodized to prevent oxidation
- Easily installed, bolt-on kit includes zinc-plated hardware for corrosion resistance
- Compatible with 4.0L, 4.2L and 2.5L engines
The right way to install a body lift on your Jeep Wrangler YJ is with a JKS budget motor mount lift kit. Simple, 1 in. spacers raise OE front motor mounts on chassis. Improves rear driveline angle by tilting transfer case output shaft towards the rear axle. Re-aligns engine fan with radiator shroud for proper cooling efficiency. Retains OE rubber bushings for vibration absorption. Machined from solid premium T6061-T6 aluminum and anodized to prevent oxidation. The complete, bolt-on kit includes zinc-plated hardware. Compatible with 4.0L, 4.2L and 2.5L engines.