1969 Chevrolet Blazer Moog Parts

Choose your Engine for your 1969 Chevrolet Blazer

6 Cyl 4.1L 6 Cyl 4.8L 8 Cyl 5.0L 8 Cyl 5.7L

Showing 1 - 10 of 42 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1969 Chevrolet Blazer Suspension Ball Joint - Front Lower Moog

Ball Joint
MOOG K8195T Ball Joint
Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1969 - Chevrolet Blazer	Front Lower	4WD

37 In Stock

$54.14 CAD

$64.97 CAD

Brand	Moog
Part #	M12K8195T
Condition	New
Warehouse	B

UPC: 080066271897

1969 Chevrolet Blazer Suspension Ball Joint - Front Lower Moog

Ball Joint
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG K8195T Ball Joint
Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
Features:
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOGÂ® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

02-88001, 02-88004, 0288001E, 10247PA, 10253, 10253HD, 1253K, 14039008, 260-1106, 260-1342, 260-1342FT, 260-1364, 2601342FT, 288001, 288004, 305113, 31027, 3633950...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
1969 - Chevrolet Blazer	Front Lower	4WD

37 In Stock

$54.14 CAD

$64.97 CAD

Brand	Moog
Part #	M12K8195T
Condition	New
Warehouse	B

UPC: 080066271897

1969 Chevrolet Blazer Suspension Control Arm Shaft Kit - Front Upper Moog

Control Arm Shaft Kit
MOOG K6098 Control Arm Shaft Kit
Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

0786900E, 11193, 13167A, 280-3520, 3167K, 337101, 3846345, 45J0003, 46J0003A, 522586, 52296889, 595-1003, 595-1003B, 624.66001, 62566001, 786900, 805-13167A, 8060980...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
1969 - Chevrolet Blazer	Front Upper	RWD

1 In Stock

$86.66 CAD

$103.99 CAD

Brand	Moog
Part #	M12K6098
Condition	New
Warehouse	B

UPC: 080066151281

1969 Chevrolet Blazer Universal Joint - Front Axle Shaft - Right Outer Moog

Non-Greaseable Super Strength Universal Joint
Non-Greasable Super Strength U-Joint
MOOG Non-Greaseable Super Strength 365 U-joint
Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
  - 2.188
  - 55.5
- Length Axis 2:
  - 2.188
  - 55.5
- Length A - Inch: 2.188
- OE Series: Spicer 1310-wj
- Length A - mm: 55.5
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Grooved
- Greaseable: No
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.188
- Length B - mm: 55.5
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Groove To Outside Of Groove
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:

1-0174, 1-0174BF, 10174G, 114-573, 20126, 20192, 20192P, 210-0260, 215-0260, 260, 28174X, 45U0125, 5-260X, DT260, G5-260X, U260, U260HP

Additional Fitment Information:

Vehicle	Position
1969 - Chevrolet Blazer	Front Axle Shaft - Right Outer

1 In Stock

$38.00 CAD

$45.60 CAD

Brand	Moog
Part #	M12365
Condition	New
Warehouse	B

UPC: 080066607535

1969 Chevrolet Blazer Universal Joint - At Transmission Moog

Greaseable Super Strength Universal Joint
1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
MOOG Greaseable Super Strength 232 U-joint
Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.188
  - 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
  - 3.625
  - 92.1
- Length Axis 2:
  - 3.625
  - 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
  - 1.188
  - 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:

114578B, 2154178, 45U0109

Additional Fitment Information:

Vehicle	Trans Type	Transmission	Position	Trans. Speed
1969 - Chevrolet Blazer	Transmission	Manual	At Transmission	4

16 In Stock

$39.38 CAD

$47.26 CAD

Brand	Moog
Part #	M12232
Condition	New
Warehouse	B

UPC: 080066605005

1969 Chevrolet Blazer Coil Spring Set - Front 8 Cyl 5.0L Moog

Coil Spring Set
Constant Rate Spring
MOOG 6082 Coil Spring Set
Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
  - 13.18
  - 334.80
- Wire Diameter:
  - 0.75
  - 19.10
- Front Spring Compressed Length:
  - 10.00
  - 254.00
- Rear Spring Compressed Length:
  - 10.00
  - 254.00
- Front Spring Outside Diameter: 5.180
- Front Spring Relaxed Length:
  - 13.18
  - 334.80
- Rear Spring Outside Diameter: 5.180
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:

277-1750, 3817997, 3935893, 45H0011, 585-1011, 630.34001, 831-6082, CS6082, FCS6082S, FCS750S, SMS6082, U6082P

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1969 - Chevrolet Blazer	V	-	Front	8 Cyl 5.0L	307

2 In Stock

$221.89 CAD

$266.27 CAD

Brand	Moog
Part #	M126082
Condition	New
Warehouse	B

UPC: 080066141619

1969 Chevrolet Blazer Universal Joint - At Rear Axle Moog

Non-Greaseable Super Strength Universal Joint
with Lube Fitting in Body Non-Greasable Super Strength U-Joint
MOOG Non-Greaseable Super Strength 269 U-joint
Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
  - 3.22
  - 81.7
- Length Axis 2:
  - 3.22
  - 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:

1-0153BF, 10153G, 20049P, 45U0145, 5-529X, 529, DT467, G5-467X, U153HP

Additional Fitment Information:

Vehicle	Position
1969 - Chevrolet Blazer	At Rear Axle

13 In Stock

$30.90 CAD

$37.08 CAD

Brand	Moog
Part #	M12269
Condition	New
Warehouse	B

UPC: 080066605562

1969 Chevrolet Blazer Universal Joint - Rear Driveshaft at Rear Axle Moog

Non-Greaseable Super Strength Universal Joint
with Lube Fitting in Body Non-Greasable Super Strength U-Joint
MOOG Non-Greaseable Super Strength 269 U-joint
Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
  - 3.22
  - 81.7
- Length Axis 2:
  - 3.22
  - 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:

Vehicle	Position
1969 - Chevrolet Blazer	Rear Driveshaft at Rear Axle

13 In Stock

$30.90 CAD

$37.08 CAD

Brand	Moog
Part #	M12269
Condition	New
Warehouse	B

UPC: 080066605562

1969 Chevrolet Blazer Steering Drag Link Adjusting Sleeve - Pitman Arm To Steering Arm Moog

Tie Rod End Adjusting Sleeve
MOOG ES362S Tie Rod End Adjusting Sleeve
Product Attributes:
- Length: 4.5
Features:
- Coated for corrosion resistance
- Alloy steel construction provides durability
- Includes any necessary hardware
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-88901, 0388901E, 14007644, 15617288, 269-1105, 269-1120, 269-1128, 310180, 3735346, 3735347, 388901, 4112842, 4112843, 41137, 425-1002, 425-1002B, 45A6002, 46A6002A...VIEW MORE

Additional Fitment Information:

Vehicle	Position	Drive Type
1969 - Chevrolet Blazer	Pitman Arm To Steering Arm	4WD

Brand	Moog
Part #	M12ES362S
Condition	New
Warehouse	B

UPC: 080066107387

1969 Chevrolet Blazer Universal Joint - Front Axle Shaft - Right Outer Moog

Greaseable Super Strength Universal Joint
Greasable Super Strength U-Joint
MOOG Greaseable Super Strength 378 U-joint
Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
  - 2.188
  - 55.5
- Length Axis 2:
  - 2.188
  - 55.5
- Length A - Inch: 2.188
- OE Series: Spicer 1310-wj
- Length A - mm: 55.5
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
  - 1.063
  - 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.188
- Length B - mm: 55.5
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.