1983 Chevrolet G30 Moog Parts

Showing 1 - 10 of 23 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1983 Chevrolet G30 Coil Spring Set - Front Moog

Coil Spring Set
Constant Rate Spring
MOOG 6454 Coil Spring Set
Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
  - 13.61
  - 345.70
- Wire Diameter:
  - 0.82
  - 21.00
- Front Spring Compressed Length:
  - 10.00
  - 254.00
- Rear Spring Compressed Length:
  - 10.00
  - 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
  - 13.61
  - 345.70
- Rear Spring Outside Diameter: 5.340
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:

277-2074, 328098, 328099, 328100, 328101, 45H0076, 52049830, 585-1076, 630.66078, 831-6454, 92-6454, CS6454, FCS6454S, SMS6454, U6454P

Additional Fitment Information:

Vehicle	Position	Fuel Type
1983 - Chevrolet G30	Front	GAS

8 In Stock

$211.44 CAD

$253.73 CAD

Brand	Moog
Part #	M126454
Condition	New
Warehouse	B

UPC: 080066119434

1983 Chevrolet G30 Suspension Stabilizer Bar Bushing Kit - Front To Frame Moog

Stabilizer Bar Bushing Kit
OE Type Standard Design
MOOG K6169 Stabilizer Bar Bushing Kit
Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.060
- Includes Hardware: No
- Inner Diameter (Inch): 1.060
- Length (Inch): 1.380
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.770
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:

04-86500, 11176, 265-1377, 265-1979, 265-2175, 265-2178, 320110, 3927019, 45G0527, 45G0653, 46G0527A, 486500, 531-464, 550-1027, 550-1027B, 550115-3, 602.66023, 8-03927-019-0...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	Front To Frame

13 In Stock

$25.92 CAD

$31.10 CAD

Brand	Moog
Part #	M12K6169
Condition	New
Warehouse	B

UPC: 080066143415

1983 Chevrolet G30 Universal Joint - At Center Bearing Moog

Non-Greaseable Super Strength Universal Joint
1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
MOOG Non-Greaseable Super Strength 231 U-joint
Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
  - 1.188
  - 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
  - 3.625
  - 92.1
- Length Axis 2:
  - 3.625
  - 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
  - 1.188
  - 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:

2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	At Center Bearing

8 In Stock

$34.80 CAD

$41.76 CAD

Brand	Moog
Part #	M12231
Condition	New
Warehouse	B

UPC: 080066604978

1983 Chevrolet G30 Steering Tie Rod End Adjusting Sleeve Moog

Tie Rod End Adjusting Sleeve
4.72 (in) Length with 11/16 (in) x 18 Threads
MOOG ES2004S Tie Rod End Adjusting Sleeve
Product Attributes:
- Length: 4.75
Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-84900, 0384900E, 0645217, 0928833, 12309226, 1474919, 1553703, 1634619, 26033090, 26048561, 26059034, 269-1109, 269-1113, 310252, 3200671, 3497704, 380013C01, 381484...VIEW MORE

Additional Fitment Information:

Vehicle
1983 - Chevrolet G30

Brand	Moog
Part #	M12ES2004S
Condition	New
Warehouse	B

UPC: 080066579078

1983 Chevrolet G30 Steering Tie Rod End - Inner Moog

Tie Rod End
MOOG ES409LT Tie Rod End
Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	Inner

Brand	Moog
Part #	M12ES409LT
Condition	New
Warehouse	B

UPC: 080066542201

1983 Chevrolet G30 Steering Tie Rod End - Inner Moog

Tie Rod End
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG ES409LT Tie Rod End
Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-86002, 0386002E, 14002550, 26059505, 269-2231, 310211, 378344, 386002, 3972488, 3986724, 401-1090, 401-1090B, 41083, 45A0090, 46A0090A, 52303478, 534-749, 612.66012...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	Inner

Brand	Moog
Part #	M12ES409LT
Condition	New
Warehouse	B

UPC: 080066542201

1983 Chevrolet G30 Steering Tie Rod End - Outer Moog

Tie Rod End
Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
MOOG ES2218RL Tie Rod End
Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.687
- End 2 Gender: Male
- Length - Stud Center to End: 6.800
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

03-86004, 0386004E, 14069514, 269-2601, 310328, 386004, 401-1310, 401-1310B, 41139, 45A0310, 46A0310A, 52306922, 531-373, 612.66011, 61366011, 802-2218R, 8022188, E-6721-TU...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	Outer

Brand	Moog
Part #	M12ES2218RL
Condition	New
Warehouse	B

UPC: 080066122465

1983 Chevrolet G30 Steering Tie Rod End - Outer Moog

Tie Rod End
MOOG ES2218RL Tie Rod End
Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.687
- End 2 Gender: Male
- Length - Stud Center to End: 6.800
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVERÂ® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Backed by superior materials and rigorous testing, MOOGÂ® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1983 - Chevrolet G30	Outer

Brand	Moog
Part #	M12ES2218RL
Condition	New
Warehouse	B

UPC: 080066122465

1983 Chevrolet G30 Leaf Spring Bushing - Rear To Spring Moog

Leaf Spring Shackle Bushing
MOOG SB335 Leaf Spring Shackle Bushing
Product Attributes:
- Width of the Leaf Spring (Inch): 2.990
- Includes Hardware: No
- Inner Diameter (Inch): 0.570
- Length (Inch): 2.990
- Meets/Exceeds OE Manufacturer Specs: Yes
- Part Description: Leaf Spring Bushing
- Outer Diameter (Inch): 2.000
Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Wheel FeedBase
1983 - Chevrolet G30	Rear To Spring	146.0

Brand	Moog
Part #	M12SB335
Condition	New
Warehouse	B

UPC: 080066031682

1983 Chevrolet G30 Leaf Spring Shackle Bushing - Rear To Spring Moog

Leaf Spring Shackle Bushing
MOOG SB335 Leaf Spring Shackle Bushing
Product Attributes:
- Width of the Leaf Spring (Inch): 2.990
- Includes Hardware: No
- Inner Diameter (Inch): 0.570
- Length (Inch): 2.990
- Meets/Exceeds OE Manufacturer Specs: Yes
- Part Description: Leaf Spring Bushing
- Outer Diameter (Inch): 2.000
Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

274-1176, 274-1785, 274-6514, 274-6591, 274-6977, 3888968, 45G15300, 468481, 46G15300A, 537-049, 576-3393, 5763300, 5763300B, 602.66060, B335, CB1176, E-6526-TU, E6526...VIEW MORE

Additional Fitment Information: