1957 Plymouth Belvedere Mr Gasket Parts

Choose your Engine for your 1957 Plymouth Belvedere


Showing 1 - 10 of 10 products
Image
SKU
Product
Rating
Price

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1957 - Plymouth Belvedere

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1957 - Plymouth Belvedere

Mr Gasket
  • Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers
  • Intake Manifold Bolts; Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers;
  • Intake Manifold Bolts
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Universal Fit
  • Features:
    • Zinc Plated
    • Grade 5 Quality Steel
    • Washers Included
  • These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V - 8 Cyl 4.5L 273

Mr Gasket
  • Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers
  • Intake Manifold Bolts; Grade 5; 3/8 in. -16 x 1 in.; 12 piece w/Flat Washers;
  • Intake Manifold Bolts
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Universal Fit
  • Features:
    • Zinc Plated
    • Grade 5 Quality Steel
    • Washers Included
  • These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V - 8 Cyl 4.5L 273

Mr Gasket
  • 3/8 in.-16 x 1 in.; 12 ea. w/Washers
  • Intake Manifold Bolts; 3/8 in.-16 x 1 in.; 12 ea. w/Washers;
  • Intake Manifold Bolts
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Universal V8
  • Features:
    • Grade 8 Material
    • Extra Thick Flat Washers
    • Ideal For Minimal Space
    • 12-Point Head And Flange
    • Zinc Plated For Protection
  • These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V - 8 Cyl 4.5L 273

Mr Gasket
  • 3/8 in.-16 x 1 in.; 12 ea. w/Washers
  • Intake Manifold Bolts; 3/8 in.-16 x 1 in.; 12 ea. w/Washers;
  • Intake Manifold Bolts
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Engine Make/Size: Universal V8
  • Features:
    • Grade 8 Material
    • Extra Thick Flat Washers
    • Ideal For Minimal Space
    • 12-Point Head And Flange
    • Zinc Plated For Protection
  • These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V - 8 Cyl 4.5L 273

Mr Gasket
  • 180 deg.; Race Only
  • High Performance Thermostat; 180 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 180° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.480 In.
  • Features:
    • High Performance
    • Resists Variations In Coolant
    • Brass and Copper Construction
    • Opens At Right Temperature
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V 4933 8 Cyl 4.9L 301

Mr Gasket
  • 180 deg.; Race Only
  • High Performance Thermostat; 180 deg.; Race Only;
  • High Performance Thermostat
  • Product Attributes:
    • Temperature: 180° F
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 2.480 In.
  • Features:
    • High Performance
    • Resists Variations In Coolant
    • Brass and Copper Construction
    • Opens At Right Temperature
  • Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1957 - Plymouth Belvedere V 4933 8 Cyl 4.9L 301

Mr Gasket
  • Chrome; 1.790 in. Dia.; 2 piece
  • Dust Cap; Front; Chrome; 1.790 in. Dia.; 2 pc.;
  • Dust Cap
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Outside Diameter: 1.790 In.
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 1.790 In.
    • Package Quantity: 2
  • Features:
    • Add A Finished Look
    • Heavy Chrome Plated
    • Easy Installation
    • 2 Per Set
  • If you have custom steel or mag wheels that are not designed without a provision for a center cap, youre probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Additional Fitment Information:
Vehicle Position
1957 - Plymouth Belvedere Front

Mr Gasket
  • Chrome; 1.790 in. Dia.; 2 piece
  • Dust Cap; Front; Chrome; 1.790 in. Dia.; 2 pc.;
  • Dust Cap
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • Outside Diameter: 1.790 In.
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Diameter (in.): 1.790 In.
    • Package Quantity: 2
  • Features:
    • Add A Finished Look
    • Heavy Chrome Plated
    • Easy Installation
    • 2 Per Set
  • If you have custom steel or mag wheels that are not designed without a provision for a center cap, youre probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Additional Fitment Information:
Vehicle Position
1957 - Plymouth Belvedere Front
Showing 1 - 10 of 10 products

Loading...