1985 Ford F 250 Spicer Parts

Choose your Drive Type for your 1985 Ford F-250

4WD RWD

Showing 1 - 10 of 44 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1985 Ford F-250 Differential Pinion Seal - Rear Spicer

Differential Pinion Seal
with Dana 60 Axle
FSGR
Product Attributes:
- Inside Diameter (In): 1.860
- Axle Model: Dana 60, Dana 70
Features:
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

816675, DS42449, SP 42449

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Rear

18 In Stock

$18.02 CAD

$21.62 CAD

Brand	Spicer
Part #	DSP42449
Condition	New
Warehouse	B

UPC: 00023913141158

1985 Ford F-250 Universal Joint - Rear Driveshaft at Transmission Spicer

Universal Joint
without U-Bolts 1.062in Bearing Cap Diameter Non-Greasable with 2 Piece Drive Shaft with 3.625in Outside Snap Ring Dimension
HGVF
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Length A (In): 3.625
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:

15-213X, 2-0790, 2-4800, 2-4800G, 2-4800P, 2-4801, 254, 270, 354, 45U0106, 45U0115, 45U0141, 5-213X, UJ254, UJ270, UJ354

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Rear Driveshaft at Transmission

17 In Stock

$41.71 CAD

$50.05 CAD

Brand	Spicer
Part #	DSP5-1330X
Condition	New
Warehouse	B

1985 Ford F-250 Universal Joint - Rear Driveshaft at Transmission Spicer

with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable
HGVF
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Length A (In): 3.625
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1985 - Ford F-250	Rear Driveshaft at Transmission	4WD

17 In Stock

$41.71 CAD

$50.05 CAD

Brand	Spicer
Part #	DSP5-1330X
Condition	New
Warehouse	B

1985 Ford F-250 Universal Joint - Rear Driveshaft at Transmission Spicer

with 2 Piece Drive Shaft with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable without U-Bolts
HGVF
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Length A (In): 3.625
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1985 - Ford F-250	Rear Driveshaft at Transmission	RWD

17 In Stock

$41.71 CAD

$50.05 CAD

Brand	Spicer
Part #	DSP5-1330X
Condition	New
Warehouse	B

1985 Ford F-250 Spindle Nut - Front Spicer

SPINDLE NUT - OUTER
with Dana 50 IFS Axle
FSGR
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Thread Size: 2.000 - 16
- Self Locking: N
- Flange Diameter: 63.31mm
- Thickness: 8.83mm
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

This Part Fits the Following OEM/Substitute Numbers:

1403356, DS621027

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Front

50 In Stock

$28.96 CAD

$34.75 CAD

Brand	Spicer
Part #	DSP621027
Condition	New
Warehouse	B

UPC: 00023913256357

1985 Ford F-250 Axle Spindle Thrust Washer - Front Outer Spicer

SPINDLE NUT WASHER; LOCK WASHER
Inside Diameter 50.95mm Outside Diameter 65,69mm Replaces OE Part Number(s) E5TZ-1198-A with Dana 50 Axle with Reverse Rotation
FSGR
Product Attributes:
- Inner Diameter: 2.002
- Outer Diameter: 2.845
- Thickness: 0.120
Features:
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

This Part Fits the Following OEM/Substitute Numbers:

1403358, 15582235, 5005303-3, DS621028, E5TZ-1198-1

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Front Outer

50 In Stock

$11.28 CAD

$13.54 CAD

Brand	Spicer
Part #	DSP621028
Condition	New
Warehouse	B

UPC: 00023913147433

1985 Ford F-250 Wheel Bearing and Seal Kit - Front Spicer

Wheel Bearing and Seal Kit
with Dana Model 50 IFS Axle
FSGR
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 47.60
- Cone Bore (MM): 38.10
- Cup Outside Diameter (IN): 1.87
- Bearing Type: Spindle Bearing And Seal Kit
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

This Part Fits the Following OEM/Substitute Numbers:

14009626, 70043254, DS700014, SP 700014

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Front

1 In Stock

$50.14 CAD

$60.17 CAD

Brand	Spicer
Part #	DSP700014
Condition	New
Warehouse	B

UPC: 00023913250850

1985 Ford F-250 Differential Pinion Seal - Rear Spicer

Differential Pinion Seal
with 13.46mm Width with Dana 60 Axle
FSGR
Product Attributes:
- Inside Diameter (In): 1.860
- Axle Model: Dana 60, Dana 70
Features:
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Rear

18 In Stock

$18.02 CAD

$21.62 CAD

Brand	Spicer
Part #	DSP42449
Condition	New
Warehouse	B

UPC: 00023913141158

1985 Ford F-250 Wheel Bearing and Seal Kit - Front Spicer

Wheel Bearing and Seal Kit
with Dana Model 50 IFS Axle
FSGR
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 47.60
- Cone Bore (MM): 38.10
- Cup Outside Diameter (IN): 1.87
- Bearing Type: Spindle Bearing And Seal Kit
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

Additional Fitment Information:

Vehicle	Position
1985 - Ford F-250	Front

1 In Stock

$50.14 CAD

$60.17 CAD

Brand	Spicer
Part #	DSP700014
Condition	New
Warehouse	B

UPC: 00023913250850

1985 Ford F-250 Differential End Yoke - Rear Differential Spicer

Differential End Yoke
with 29 Splines with Dana Model 60 Axle with Strap Style 1410 Series
FSGR
Product Attributes:
- Yoke Style: Bs
- Outside Yoke Dimension (In) E: 4.188
- Yoke Bearing Dimension (In) D: 1.188
- Involute Spline: Y
- C/L To End Hub S: 3.185
- Length Thru Hole Q: 1.420
- Spline Count: 29
- Major Diameter: 1.276
- Hub Diameter R: 1.874
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.