1986 Ford F 250 Yukon Gear Parts

Choose your Engine for your 1986 Ford F-250

6 Cyl 4.9L 8 Cyl 5.0L 8 Cyl 5.8L 8 Cyl 6.9L 8 Cyl 7.5L

Showing 1 - 10 of 14 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1986 Ford F-250 Differential - Front 6 Cyl 4.9L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; IFS; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Ford F-250	L	4917	Front	6 Cyl 4.9L	4WD	300

2 In Stock

$1,093.07 CAD

$1,311.68 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Ford F-250 Differential - Front 6 Cyl 4.9L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; IFS; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Ford F-250	L	4917	Front	6 Cyl 4.9L	4WD	300

2 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Ford F-250 Differential - Rear 6 Cyl 4.9L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; IFS; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

2 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Ford F-250 Spider Gear Yukon Gear

Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
Dana 44; 30 Splines Dana 44; IFS; 30 Splines~Dura Grip Posi Carrier Gear Kit
Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 44 w/Dura Grip Positraction
- Spider Gear Kit
- Includes Two Side Gears
- Four Pinion Gears
- Cross Pin Shaft
- Roll Pin And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Additional Fitment Information:

Vehicle	Drive Type
1986 - Ford F-250	4WD

1 In Stock

$550.28 CAD

$660.34 CAD

Brand	Yukon Gear
Part #	Y11YPKD44-P-30
Condition	New
Warehouse	B

1986 Ford F-250 Differential Pinion Bearing Kit Yukon Gear

Yukon Pinion install kit for Dana 60 front differential
Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Reverse Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
Pinion Install Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:

Vehicle	Drive Type
1986 - Ford F-250	4WD

1 In Stock

$342.47 CAD

$410.96 CAD

Brand	Yukon Gear
Part #	Y11PK D60-F
Condition	New
Warehouse	B

1986 Ford F-250 Axle Hub Flange 6 Cyl 4.9L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
1986 - Ford F-250	L	4917	6 Cyl 4.9L	4WD	300

1 In Stock

$554.61 CAD

$665.53 CAD

Brand	Yukon Gear
Part #	Y11YHC50006
Condition	New
Warehouse	B

1986 Ford F-250 Axle Hub Flange 8 Cyl 6.9L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
1986 - Ford F-250	V	-	8 Cyl 6.9L	4WD	420

1 In Stock

$643.49 CAD

$772.19 CAD

Brand	Yukon Gear
Part #	Y11YHC50006
Condition	New
Warehouse	B

1986 Ford F-250 Differential Pinion Bearing Kit Yukon Gear

Yukon Pinion install kit for Dana 60 front differential
Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Reverse Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
Pinion Install Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:

Vehicle	Drive Type
1986 - Ford F-250	4WD

1 In Stock

$385.21 CAD

$462.25 CAD

Brand	Yukon Gear
Part #	Y11PK D60-F
Condition	New
Warehouse	B

1986 Ford F-250 Differential - Rear 6 Cyl 4.9L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; IFS; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

2 In Stock

$1,093.07 CAD

$1,311.68 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Ford F-250 Spider Gear Yukon Gear

Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
Dana 44; 30 Splines Dana 44; IFS; 30 Splines~Dura Grip Posi Carrier Gear Kit
Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 44 w/Dura Grip Positraction
- Spider Gear Kit
- Includes Two Side Gears
- Four Pinion Gears
- Cross Pin Shaft
- Roll Pin And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.