2003 Ford F 350 Super Duty Yukon Gear Parts

Choose your Engine for your 2003 Ford F-350 Super Duty

10 Cyl 6.8L 8 Cyl 5.4L 8 Cyl 6.0L 8 Cyl 7.3L

Showing 1 - 6 of 6 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2003 Ford F-350 Super Duty Differential Pinion Bearing Kit Yukon Gear

Yukon Pinion install kit for Dana 60 front differential
Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Reverse Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
Pinion Install Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:

Vehicle	Drive Type
2003 - Ford F-350 Super Duty	4WD

1 In Stock

$342.47 CAD

$410.96 CAD

Brand	Yukon Gear
Part #	Y11PK D60-F
Condition	New
Warehouse	B

2003 Ford F-350 Super Duty Axle Hub Flange 8 Cyl 6.0L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
2003 - Ford F-350 Super Duty	V	-	8 Cyl 6.0L	4WD	363

1 In Stock

$554.61 CAD

$665.53 CAD

Brand	Yukon Gear
Part #	Y11YHC50006
Condition	New
Warehouse	B

2003 Ford F-350 Super Duty Differential Pinion Bearing Kit Yukon Gear

Yukon Pinion install kit for Dana 60 front differential
Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Reverse Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
Pinion Install Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:

Vehicle	Drive Type
2003 - Ford F-350 Super Duty	4WD

1 In Stock

$385.21 CAD

$462.25 CAD

Brand	Yukon Gear
Part #	Y11PK D60-F
Condition	New
Warehouse	B

2003 Ford F-350 Super Duty Axle Hub Flange 8 Cyl 6.0L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
2003 - Ford F-350 Super Duty	V	-	8 Cyl 6.0L	4WD	363

1 In Stock

$643.49 CAD

$772.19 CAD

Brand	Yukon Gear
Part #	Y11YHC50006
Condition	New
Warehouse	B

2003 Ford F-350 Super Duty Gear Oil Yukon Gear

Yukon friction modifier/Posi additive
Positraction Additive; 4 oz.
Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
Friction Modifier
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.

Additional Fitment Information:

Vehicle
2003 - Ford F-350 Super Duty

Brand	Yukon Gear
Part #	Y11OILADD
Condition	New
Warehouse	B

2003 Ford F-350 Super Duty Gear Oil Yukon Gear

Yukon friction modifier/Posi additive
Positraction Additive; 4 oz.
Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
Friction Modifier
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.