2006 Hummer H1 Air and Fuel Delivery Parts

Choose your Part Name for your 2006 Hummer H1

Air Intake Shutdown Fuel Filter Fuel Injection Pressure Regulator Fuel Injection Pump Timer Fuel Injector Fuel Tank Cap

Showing 1 - 10 of 10 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2006 Hummer H1 Fuel Filter K&N

Fuel Filter
OD 3.5 in.; Length 6.281 in.; Threaded Inlet/Outlet
K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
In-Line Gas Filter
Product Attributes:
- Automotive Item Grade: High Performance
- Package Contents: 1 Fuel Filter
- WARNING CA Proposition 65: No
- Length: 6.281 In. (160mm)
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Package Quantity: 1
- Product Box Height: 7.300 In. (185mm)
- Filter Material: Cellulose Media
- Product Box Width: 4.300 In. (109mm)
- Package Material: Paperboard
- Product Box Length: 4.300 In. (109mm)
- Inlet Type: Oem
- Outside Diameter: 3.500 In. (89mm)
- Fitting Type: Oem
- Package Type: Box
- Package Content: 1
- Outlet Type: Oem
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.

This Part Fits the Following OEM/Substitute Numbers:

12633243, 19255090, 19256762, 23910, 33810, 33910, 33960, 33960XE, 33960XEMI, 33960XEMP, 3810, 3910, 3960, 3960XE, 3960XEMI, 565, 568, 5745956...VIEW MORE

Additional Fitment Information:

Vehicle
2006 - Hummer H1

5 In Stock

$81.98 CAD

$98.38 CAD

Brand	K&N
Part #	K33PF-3000
Condition	New
Warehouse	B

2006 Hummer H1 Fuel Tank Cap Gates

OE Equivalent

Additional Fitment Information:

Vehicle
2006 - Hummer H1

1 In Stock

$37.69 CAD

$45.23 CAD

Brand	Gates
Part #	GAT1621379
Condition	New
Warehouse	A

2006 Hummer H1 Fuel Tank Cap Gates

OE Equivalent
Stant Cap

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	Gates
Part #	GAT1686017
Condition	New
Warehouse	A

2006 Hummer H1 Fuel Injection Pressure Regulator Bosch

2006 Hummer H1 Fuel Injection Pressure Regulator Bosch

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	Bosch
Part #	BOS4661789
Condition	New
Warehouse	A

2006 Hummer H1 Fuel Tank Cap CARQUEST

OE Equivalent

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	CARQUEST
Part #	CQT1635347
Condition	New
Warehouse	A

2006 Hummer H1 Fuel Tank Cap CARQUEST

OE Equivalent Locking

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	CARQUEST
Part #	CQT2348496
Condition	New
Warehouse	A

2006 Hummer H1 Fuel Injector Delphi

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Remanufactured
Reman.

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	Delphi
Part #	DEL3789521
Condition	Remanufactured
Warehouse	A

2006 Hummer H1 Fuel Injection Pump Timer BD Diesel

Includes CDT2 Control Module/CDT2 Wiring Harness/Cable Tie/Posi-Tap Connectors/Ring Connector
Cool Down Timer Kit V2.0; Includes CDT2 Control Module/CDT2 Wiring Harness/Cable Tie/Posi-Tap Connectors/Ring Connector;
Cool Down Timer Kit V2.0
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
Features:
- Prevent Turbo Damage During Hot Engine Shutdown
- EGT Time And Manual Controlled Shutdown
- Works With Any K-Type EGT Probe
- Compatible With Most OEM Vehicle Security Alarms
Turbochargers operate at high temperatures. The Cool Down Timer is designed to keep the engine running when the ignition is turned off to prevent turbocharger bearing failure that could occur when the engine is shut down, stopping the cool lubricating oil flowing to the turbocharger while it is still hot. If the oil flow is shut off too early, the remaining oil in the bearing housing will overheat causing coking of the bearings which causes both premature bearing wear and reduced oiling of the bearings. Allowing the engine to idle to a minimum operating speed gives the turbocharger time to cool down. The CDT is adjustable for up to 5 minutes of idle time, or optionally works with any K-Type EGT probe for temperature-based shutdown.

Additional Fitment Information:

Vehicle
2006 - Hummer H1

Brand	BD Diesel
Part #	1081160
Condition	New
Warehouse	C

2006 Hummer H1 Fuel Filter 8 Cyl 6.6L Wix

WIX Fuel Cartridge (Special Type) Filter
Updated Version with Plastic Lid
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.574
- Duty Type: Hd
- Micron: 14.00
- Ends: None
- Style: Fuel Cartridge (special Type)
- Media Material: Enhanced Cellulose
- Outer Diameter Bottom: 3.700
- Class: Hb
WIX HD Fuel Filters offers high quality, high efficiency media specific to the application such as medium and heavy trucks, farm, construction, mining and other equipment applications. WIX filters are recommended for OEM fuel filter change intervals. High strength, corrosion resistant cans, center tubes, and end caps with superior sealing components ensure a leak resistant, long lasting, high performing fuel filter under all types of operating conditions.

This Part Fits the Following OEM/Substitute Numbers:

05742602, 05745956, 10154635, 10183997, 10226035, 23976, 25176756, 29215, 30427, 31712, 33976, 3976, 5002230410, 52081, 5745956, 61633376, 73376, 86976...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Region	Engine	CID
2006 - Hummer H1	V	-	Canada	8 Cyl 6.6L	400

Brand	Wix
Part #	W6933976
Condition	New
Warehouse	B

UPC: 765809339767

2006 Hummer H1 Air Intake Shutdown BD Diesel

Manual Controlled; Includes Air Shutoff Valve/Boots/Wiring Harness/Bead Ring/Drill Template/C-Clip/Clamps/Velcro Strips/Heat Shrink/Module/Solder
Positive Air Shutdown; Manual Controlled; Includes Air Shutoff Valve/Boots/Wiring Harness/Bead Ring/Drill Template/C-Clip/Clamps/Velcro Strips/Heat Shrink/Module/Solder;
Positive Air Shutdown
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
Features:
- Most Effective Method To Emergency Shutdown Engine
- Butterfly Valve Placed In-Line In The Air Intake System
- Heavy Duty Elect. Solenoid Trips A Locked Safety Cam
- Unique Locking Lever Holds Vale
- Unique Bead Lock Keeps Boots in Place No Welding Required
- Reduced Overall Size As Compared To Competitive Units
- Weatherproof Electrical Components To Prevent Corrosion
- CAC Pipes Included For Some Vehicles
- Manual Engine Shutdown
- 24 Months or 24000 Miles Warranty
When you need an emergency engine shutdown system, then BD has the solution that is hard to PASs up. Some industries such as mining, oil refinery, forestry, mobile welding, septic removal and refueling require some vehicles to have an emergency engine shutdown in place. The most effective method for this is to cut the air supply to the Diesel engine ensuring fuel ignition to cease. With BDs Positive Air Shutdown (PAS), an inline butterfly valve is placed in the air intake line and when activated by its heavy duty electrical solenoid, the engine will shutdown within seconds.Standard applications include automatic over-speed electronics and CAC pipes included for some vehicles. The PAS butterfly valve design reduces the number of parts and the overall size as compared to competitive units. Aluminum and stainless components plus weatherproof electrical connectors are used to prevent corrosion. Easy installation with no welding needed for hose retaining beads by utilizing innovative bead boot locks.