1990 Mercedes Benz 300TE Belts and Cooling Parts

Choose your Part Name for your 1990 Mercedes-Benz 300TE

A/C Drive Belt Idler Pulley Bolt Accessory Drive Belt Accessory Drive Belt Idler Pulley Accessory Drive Belt Tensioner Accessory Drive Belt Tensioner Pulley Automatic Transmission Oil Cooler Hose Auxiliary Engine Cooling Fan Relay Belt Tensioner Adjuster Belt Tensioner Bracket Belt Tensioner Damper Drive Belt Idler Nut Engine Auxiliary Water Pump Engine Coolant Bleeder Screw Engine Coolant Bypass Hose Engine Coolant Level Sensor Engine Coolant Level Sensor O-Ring Engine Coolant Reservoir Engine Coolant Reservoir Cap Engine Coolant Reservoir Hose Engine Coolant Reservoir Plug Kit Engine Coolant Temperature Sensor Engine Coolant Thermostat Engine Coolant Thermostat Housing Cap Engine Coolant Thermostat Seal Engine Cooling Fan Engine Cooling Fan Assembly Engine Cooling Fan Blade Engine Cooling Fan Clutch Engine Cooling Fan Clutch Bearing Bracket Engine Cooling Fan Clutch Blade Engine Cooling Fan Clutch Bolt Engine Cooling Fan Controller Engine Cooling Fan Pulley Engine Cooling Fan Resistor Engine Cooling Fan Screen Engine Cooling Fan Shroud Engine Water Pump Engine Water Pump Drain Tube Engine Water Pump Housing Engine Water Pump O-Ring Engine Water Pump Pulley Bolt Cover Hose Clamp Radiator Radiator Cap Radiator Coolant Hose Radiator Cooling Unit Holder Radiator Drain Plug Radiator Fitting Radiator Mount Kit Serpentine Belt

Showing 1 - 10 of 92 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1990 Mercedes-Benz 300TE Serpentine Belt 6 Cyl 3.0L Gates

Premium OE Micro-V Belt
Product Attributes:
- Top Width:
  - .807
  - 20
- Outside Circumference:
  - 2428
  - 95.585
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
  - 2414
  - 95.02
- Rib Quantity: 6
- Cord Material: Polyester

This Part Fits the Following OEM/Substitute Numbers:

0099971692, 0109975892, 0109978192, 0119974792, 059903137AG, 06004122, 06E903137A, 06E903137J, 10229101, 12550111, 12557719, 12559312, 12569434, 12576747, 12636138, 12636139, 141-1466, 146-062415...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Fuel Type	Engine	CID
1990 - Mercedes-Benz 300TE	L	2962	GAS	6 Cyl 3.0L	-

7 In Stock

$62.29 CAD

$74.75 CAD

Brand	Gates
Part #	GRCK060950
Condition	New
Warehouse	B

UPC: 072053107661

1990 Mercedes-Benz 300TE Engine Cooling Fan Derale

17in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
w/Standard Mount Kit; 23.5/17.4 Amp Draw High/Low; 16-7/8 in. Width; 16-7/8 in. Height; 2-5/8 in. Depth; 8-7/8 in. x 15-5/8 in. Mounting; Single
17in. High Output Electric Fan; Std Kit
Radiator Pusher/Puller Fan
Product Attributes:
- Diameter (in.): 17.000 In.
Features:
- Mounts As Pusher Or Puller w/out Flipping Blade
- State-Of-The-Art Symmetrical Design
- High Output 265 Watt 2-Speed Motor
- 2400 CFM On High Speed/1800 CFM On Low Speed
Our most popular, this 17 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2400 CFM while drawing up to 23.5 amps.

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

4 In Stock

$220.29 CAD

$264.35 CAD

Brand	Derale
Part #	D6518217
Condition	New
Warehouse	B

1990 Mercedes-Benz 300TE Engine Cooling Fan Derale

16in. Tornado Electric Puller Fan; Standard Mounting Kit
2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
16in. Tornado Electric Fan; Standard Kit
Tornado Electric Puller Fan
Product Attributes:
- Diameter (in.): 16.000 In.
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

5 In Stock

$209.63 CAD

$251.56 CAD

Brand	Derale
Part #	D6516626
Condition	New
Warehouse	B

1990 Mercedes-Benz 300TE Engine Cooling Fan Controller Derale

Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
Electric Fan Controller
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

12 In Stock

$99.64 CAD

$119.57 CAD

Brand	Derale
Part #	D6516749
Condition	New
Warehouse	B

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Mahle

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Mahle

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Behr

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

4 In Stock

$25.41 CAD

$30.49 CAD

Brand	Mahle
Part #	MAH1630998
Condition	New
Warehouse	A

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Calorstat

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Calorstat

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Vernet

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

1 In Stock

$23.51 CAD

$28.21 CAD

Brand	Calorstat
Part #	CAL1630998
Condition	New
Warehouse	A

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Seal Victor Reinz

1990 Mercedes-Benz 300TE Engine Coolant Thermostat Seal Victor Reinz

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle
1990 - Mercedes-Benz 300TE

1 In Stock

$6.60 CAD

$7.92 CAD

Brand	Victor Reinz
Part #	REI1644037
Condition	New
Warehouse	A

1990 Mercedes-Benz 300TE Serpentine Belt - Main Drive Dayco

Product Attributes:
- Cross Section: K-section
- Top Width: .82
- Rib Profile: Straight Rib
- Outside Circumference:
  - 2429.26
  - 95.64
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
  - 2415.04
  - 95.08
- Minimum Operating Temperature:
  - -42.7
  - -45
- 381: 6
- Maximum Operating Temperature:
  - 100
  - 212

This Part Fits the Following OEM/Substitute Numbers:

06004122, 06E.903.137A, 06E.903.137J, 10229101, 12550111, 12557719, 12564761, 12569350, 12569434, 12576453, 12576747, 12636138, 12636139, 12637200, 146-062415, 25-060950, 25-060952, 25-76095...VIEW MORE

Additional Fitment Information:

Vehicle	Position
1990 - Mercedes-Benz 300TE	Main Drive

Brand	Dayco
Part #	D355060950
Condition	New
Warehouse	B

1990 Mercedes-Benz 300TE Radiator Cap 6 Cyl 3.0L Motorad

Radiator cap
Relief pressure 20 lb
Standard
Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type:
  - No
  - Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Filler Neck Height: 0.75
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

This Part Fits the Following OEM/Substitute Numbers:

10235, 10235ST, 10391, 12R11, 1678-44402, 17020, 31522, 380177, 7020, 703-2465, 902-5202, 9T20, DLR14713, DLR14716, P7020, T20

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1990 - Mercedes-Benz 300TE	L	2962	6 Cyl 3.0L	-

Brand	Motorad
Part #	C97T20
Condition	New
Warehouse	B

1990 Mercedes-Benz 300TE Engine Coolant Thermostat 6 Cyl 3.0L Motorad

Thermostat-192 Degrees
Temperature 192F OEM Recommended Temp
Standard
Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.64
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.69 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 0.97 In
- Temperature (Degree): 192
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

This Part Fits the Following OEM/Substitute Numbers:

1102000515, 13649, 1601-230892, 1L2Z8575AA, 248-192JV, 24893, 280, 2L2Z8575AA, 33079, 33079S, 33972, 33979, 33980, 3529, 3529-TS, 35649, 48019, 48089...VIEW MORE

Additional Fitment Information: