1999 BMW Z3 Belts and Cooling Parts

Choose your Part Name for your 1999 BMW Z3

A/C Drive Belt Tensioner A/C Drive Belt Tensioner Pulley Accessory Drive Belt Accessory Drive Belt Idler Pulley Accessory Drive Belt Tensioner Accessory Drive Belt Tensioner Assembly Accessory Drive Belt Tensioner Pulley Automatic Transmission Oil Cooler Automatic Transmission Oil Cooler Hose Automatic Transmission Oil Cooler Hose Seal Engine Coolant Bleeder Screw Engine Coolant Hose Engine Coolant Pipe Engine Coolant Pipe O-Ring Engine Coolant Reservoir Engine Coolant Reservoir Cap Engine Coolant Reservoir Hose Engine Coolant Temperature Sender Engine Coolant Temperature Sensor Engine Coolant Thermostat Engine Coolant Thermostat Housing Engine Coolant Thermostat Housing Assembly Engine Coolant Thermostat Housing Gasket Engine Coolant Thermostat Seal Engine Coolant Water Bypass Gasket Engine Cooling Fan Engine Cooling Fan Blade Engine Cooling Fan Clutch Engine Cooling Fan Clutch Blade Engine Cooling Fan Controller Engine Cooling Fan Resistor Engine Cooling Fan Shroud Rivet Engine Cooling Fan Switch Engine Water Pump Engine Water Pump Gasket Engine Water Pump O-Ring Engine Water Pump Pulley Engine Water Pump Pulley Bolt Cover Hose Clamp Radiator Radiator Coolant Hose Radiator Drain Plug Radiator Mount Radiator Mount Bracket Serpentine Belt

Showing 1 - 10 of 163 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1999 BMW Z3 Accessory Drive Belt Idler Pulley - Alternator, Water Pump and Power Steering 6 Cyl 3.2L Gates

W/Hyd. Tensioner
DriveAlign Premium OE Pulley
Product Attributes:
- Contact Surface: Smooth/backside
- Groove Quantity: 0
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 10
- Outside Diameter: 80
- Width: 24.5
- Contents: Pulley

This Part Fits the Following OEM/Substitute Numbers:

11281726181, 11281730571, 11281738061, 11281738605, 11281748130, 11287841228, 38069, 419-650, 45044, 49062, 5310003100, 89089, 89089FN, 900003, 900003A, FU27992

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1999 - BMW Z3	L	3152	Alternator, Water Pump and Power Steering	GAS	6 Cyl 3.2L	-

3 In Stock

$54.27 CAD

$65.12 CAD

Brand	Gates
Part #	GRC38069
Condition	New
Warehouse	B

UPC: 072053149241

1999 BMW Z3 Engine Coolant Thermostat Housing Assembly 6 Cyl 2.5L Motorad

Integrated Housing Thermostat-207 Degrees
Temperature 207F Includes housing, thermostat, and seal OEM Recommended Temp
Integrated Housing Thermostat
Product Attributes:
- Mounting Hardware Included: No
- Bolt Hole Quantity: 4
- Jiggle Pin Included: No
- Gasket/Seal Material: Rubber
- Start to Open Temperature: 207
- Installation Tool Included: No
- Number Of Outlet Ports: 2
- Temperature: 207
- Bolts Included: No
- Opening Temperature: 207
- Outlet Diameter: 1.52 In; 1.52 In
- Temperature (Degree): 207
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

This Part Fits the Following OEM/Substitute Numbers:

11530139877, 11531437040, 11537509227, 12T108D, 14602, 423-206, 4602, 4602-TS, 467-185, 56718, 85955, 86177, 902-813, 9467185, P4602, QRT72, TH6499.97J, TM1397...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1999 - BMW Z3	L	2494	6 Cyl 2.5L	152

2 In Stock

$83.63 CAD

$100.36 CAD

Brand	Motorad
Part #	C97467-185
Condition	New
Warehouse	B

1999 BMW Z3 Engine Coolant Reservoir Cap 4 Cyl 1.9L Motorad

Engine Coolant Reservoir Cap
Relief pressure 30 lb
Standard
Product Attributes:
- Attachment Type: Threaded
- Diameter: 2.44
- Valve OD: 1.21 In
- Pressure Release Lever: No
- Vented: Yes
- Pressurized: Yes
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

This Part Fits the Following OEM/Substitute Numbers:

10247, 11247, 12R25, 1678-290342, 17043, 17111468076, 17111742231, 17117639022, 31332, 703-1399, 7043, 9T42, DLR14703, P7043, T42

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1999 - BMW Z3	L	1895	4 Cyl 1.9L	-

7 In Stock

$17.25 CAD

$20.70 CAD

Brand	Motorad
Part #	C97T42
Condition	New
Warehouse	B

1999 BMW Z3 Engine Cooling Fan Controller Derale

Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
Electric Fan Controller
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.

Additional Fitment Information:

Vehicle	Sub Model
1999 - BMW Z3	2.8i

10 In Stock

$99.64 CAD

$119.57 CAD

Brand	Derale
Part #	D6516749
Condition	New
Warehouse	B

1999 BMW Z3 Engine Cooling Fan Derale

16in. Tornado Electric Puller Fan; Standard Mounting Kit
2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
16in. Tornado Electric Fan; Standard Kit
Tornado Electric Puller Fan
Product Attributes:
- Diameter (in.): 16.000 In.
Features:
- Reliable/Efficient/High Torque Motors
- 2175 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.

Additional Fitment Information:

Vehicle	Sub Model
1999 - BMW Z3	Coupe

3 In Stock

$209.63 CAD

$251.56 CAD

Brand	Derale
Part #	D6516626
Condition	New
Warehouse	B

1999 BMW Z3 Engine Coolant Thermostat Housing 6 Cyl 3.2L Dorman

Engine Coolant Thermostat Housing
Plastic w/4 Bolts Cover
Product Attributes:
- O Rings Included:
  - No
  - Not Required
- Thermostat Included: No
- Package Contents: Thermostat Housing With Gasket
- Mounting Hole Diameter: 0.313
- Bolts Included: No
- Mounting Hole Quantity: 4
- Outlet Port Diameter: 1.5
- Air Vent (Bleeder Valve): No
Features:
- Ideal replacement - this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in replacement thermostat housings
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

This Part Fits the Following OEM/Substitute Numbers:

11531722531, 147-0018, 147-0041, 4501, 5541KT, 815541, 85541, CH5541

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1999 - BMW Z3	L	3152	6 Cyl 3.2L	-

2 In Stock

$38.67 CAD

$46.40 CAD

Brand	Dorman
Part #	D18902-5003
Condition	New
Warehouse	B

1999 BMW Z3 Accessory Drive Belt Tensioner Pulley - Air Conditioning 6 Cyl 2.5L Dayco

Product Attributes:
- :
  - 24.5
  - 70
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Bearing Width: 14
- Flat: Y

This Part Fits the Following OEM/Substitute Numbers:

04792835AA, 04891720AA, 11 28 1 427 252, 11.28.1.440.237, 11.28.7.530.314, 11.28.7.549.557, 11.28.7.574.834, 11.28.7.834.256, 11.28.7.835.416, 11.28.7.839.133, 1341A005, 1341A029, 17530-78K01, 231133, 25287-25100, 25287-25110, 31180-RB0-J01, 36323...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1999 - BMW Z3	L	2494	Air Conditioning	6 Cyl 2.5L	152

Brand	Dayco
Part #	D3589133
Condition	New
Warehouse	B

1999 BMW Z3 Accessory Drive Belt Tensioner Pulley - Alternator and Power Steering 6 Cyl 2.8L Dayco

Mechanical Tensioner
Product Attributes:
- :
  - 24.5
  - 70
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Bearing Width: 14
- Flat: Y

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1999 - BMW Z3	L	2793	Alternator and Power Steering	6 Cyl 2.8L	-

Brand	Dayco
Part #	D3589133
Condition	New
Warehouse	B

1999 BMW Z3 Serpentine Belt - Air Conditioning 6 Cyl 3.2L Gates

Premium OE Micro-V Belt
Product Attributes:
- Top Width:
  - .667
  - 17
- Outside Circumference:
  - 36.125
  - 918
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
  - 35.56
  - 903
- Rib Quantity: 5
- Cord Material: Polyester

This Part Fits the Following OEM/Substitute Numbers:

1090193, 1091101, 11281437449, 11281437873, 11281470024, 11281703944, 1172003N00, 14-0864-2, 141-1289, 1437449692637, 146-051005, 1703944, 1738988, 200582, 200822, 203899, 205036, 225360...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Position	Fuel Type	Engine	CID
1999 - BMW Z3	L	3152	Air Conditioning	GAS	6 Cyl 3.2L	-

Brand	Gates
Part #	GRCK050355
Condition	New
Warehouse	B

UPC: 072053008661

1999 BMW Z3 Engine Cooling Fan Blade 6 Cyl 3.2L Dorman

Clutch Fan Blade - Plastic
Product Attributes:
- Hub Depth: 45
- Rotation: Counterclockwise
- Blade Quantity: 11
- Flexible Blades: No
- Mounting Hardware Included: No
- Package Contents: 1 Clutch Fan Assembly
- Bolt Circle Diameter:
  - 150
  - 150 Mm
- Item Grade: Standard Replacement
- Maximum RPM: 3500
- Blade Material: Plastic
- Hub Material: Steel
- Blade Diameter: 420
- Blade Thickness: 2.5
- Airflow Type: Puller
- Blade Type: Forward Align Fin
Features:
- Direct replacement - this engine cooling fan blade fits and functions like the original equipment fan blade
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.