2014 Chevrolet Silverado 2500 Belts and Cooling Parts


Showing 1 - 9 of 9 products
Image
SKU
Product
Rating
Price

Motorad
  • Engine Coolant Reservoir Cap
  • Relief pressure 15 lb
  • Standard
  • Product Attributes:
    • Valve Outside Diameter: 1.20 In
    • Maximum Pressure: 18
    • Pressure Release Lever: No
    • Vented:
      • Vented
      • Yes
    • Filler Neck Outside Diameter: 1.98 In
    • Filler Neck Inside Diameter: 1.20 In
    • Attachment Type: Threaded
    • Shape: Round
    • Cap Depth: 1.50 In
    • Meets or Exceeds Original Equipment Manufacture Specifications: Yes
    • Pressurized: Yes
    • Lever Type: No
    • Cap Finish: Matte Black Plastic
    • Coolant Recovery System: Open & Closed System
    • Quick Pressure Release: No
    • Shell Diameter: 2.53 In
    • Filler Neck Height: 0.50 In
  • Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

This Part Fits the Following OEM/Substitute Numbers:
10248, 10248ST, 10575118, 11248, 12R27, 13502354, 15042975, 15066786, 15075118, 1678-290343, 17046, 20898801, 22652695, 22671020, 31532, 703-1711, 7046, 902-5601...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2014 - Chevrolet Silverado 2500 V 5328 Mexico 8 Cyl 5.3L 325

Motorad
  • Thermostat-187 Degrees
  • Temperature 187F Includes seal OEM Recommended Temp
  • Standard
  • Product Attributes:
    • Installation Tool Included: No
    • Sealing Flange Outside Diameter: 2.2
    • Flange Thickness: 0.05 In
    • Bypass Diameter: 1.58 In
    • Gasket/Seal Material: Rubber
    • Jiggle Pin Weep Hole: Yes
    • Bypass Length: 2.12 In
    • Temperature (Degree): 187
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

This Part Fits the Following OEM/Substitute Numbers:
12T033E, 131-160, 15158, 1601-317694, 34198, 34198S, 455808, 46158, 48290, 523-190, 52387, 89018168, 9523190, P52387, QRT49

Additional Fitment Information:
Vehicle Block CC Engine CID
2014 - Chevrolet Silverado 2500 V 5328 8 Cyl 5.3L 325

Motorad
  • Thermostat-160 Degrees
  • Temperature 160F Includes seal Alternate Temp
  • Standard
  • Product Attributes:
    • Installation Tool Included: No
    • Sealing Flange Outside Diameter: 2.2
    • Flange Thickness: 0.05 In
    • Bypass Diameter: 1.58 In
    • Gasket/Seal Material: Rubber
    • Jiggle Pin Weep Hole: Yes
    • Bypass Length: 2.12 In
    • Temperature (Degree): 160
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

This Part Fits the Following OEM/Substitute Numbers:
12661950, 12T032B, 15156, 160-325, 365-160, 523-160, 52360, 9523160

Additional Fitment Information:
Vehicle Block CC Engine CID
2014 - Chevrolet Silverado 2500 V 5328 8 Cyl 5.3L 325

Derale
  • 17in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
  • w/Standard Mount Kit; 23.5/17.4 Amp Draw High/Low; 16-7/8 in. Width; 16-7/8 in. Height; 2-5/8 in. Depth; 8-7/8 in. x 15-5/8 in. Mounting; Single
  • 17in. High Output Electric Fan; Std Kit
  • Radiator Pusher/Puller Fan
  • Product Attributes:
    • Diameter (in.): 17.000 In.
  • Features:
    • Mounts As Pusher Or Puller w/out Flipping Blade
    • State-Of-The-Art Symmetrical Design
    • High Output 265 Watt 2-Speed Motor
    • 2400 CFM On High Speed/1800 CFM On Low Speed
  • Our most popular, this 17 in. High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2400 CFM while drawing up to 23.5 amps.

Additional Fitment Information:
Vehicle Sub Model
2014 - Chevrolet Silverado 2500 Base

Derale
  • 16in. Tornado Electric Puller Fan; Standard Mounting Kit
  • 2175 CFM; 16 in. Fan Size; 3/4-16 in. Width; 14-1/2 in. x 9-3/4 in. Mounting; 15-3/4 in. Height; 1-3/4 in. Depth; 18.4 Amp Draw
  • 16in. Tornado Electric Fan; Standard Kit
  • Tornado Electric Puller Fan
  • Product Attributes:
    • Diameter (in.): 16.000 In.
  • Features:
    • Reliable/Efficient/High Torque Motors
    • 2175 CFM
    • Reversible Design/Can Be Used As Pusher Or Puller
    • Includes Nylon Mounting Kit
  • Our top of the line 16 in. Tornado fan uses 8 skewed blades, producing a healthy 2175 CFM at 0 static pressure, drawing only 18.4 amps from its quiet, high torque 225 watt motor. Includes mounting kit and illustrated installation instructions.

Additional Fitment Information:
Vehicle Sub Model
2014 - Chevrolet Silverado 2500 Base

Derale
  • Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
  • Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
  • Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
  • Electric Fan Controller
  • Features:
    • Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
    • 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
    • Thread in 3/8 in. NPT Temperature Sensor
    • Heavy Duty 40/60 Amp Relay
    • Includes AC Override Circuit
    • Ground Circuit Relay
    • Replacement 3/8 in. NPT Sensor Part Number 16750
  • This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.

Additional Fitment Information:
Vehicle Sub Model
2014 - Chevrolet Silverado 2500 Base

Dorman
  • Idler Pulley (Pulley Only)
  • Product Attributes:
    • Groove Quantity: 0
    • Inside Diameter: 17
    • Pulley Bearing Width (mm): 12 Mm
    • Grade Type: Regular
    • Mounting Hardware Included: No
    • Package Contents: 1 Idler Pulley
    • Width: 30
    • Belt Type: Serpentine
  • Features:
    • Direct replacement - this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
    • Restores functionality - reliable replacement for an original pulley that has failed due to vibration or corrosion
    • Durable construction - this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

This Part Fits the Following OEM/Substitute Numbers:
10067479, 10069964, 10124631, 10129569, 10141997, 10187662, 10229114, 10237275, 12552358, 12552361, 12552509, 12555244, 12555245, 12555609, 12563084, 12564505, 12564510, 12580771...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine CID
2014 - Chevrolet Silverado 2500 V 5328 L83 8 Cyl 5.3L 325

Derale
  • High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
  • High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
  • Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
  • Electric Fan Controller
  • Features:
    • Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
    • Rated At Maximum 35 Amps Per Fan
    • Activates Fan 1 At Adjusted Temperature
    • Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
    • 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
    • Die Cast Aluminum Housing
    • Includes AC Override Circuit
    • Thread-In 3/8 in. NPT Probe
  • Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.

Additional Fitment Information:
Vehicle Sub Model
2014 - Chevrolet Silverado 2500 Base

Dorman
  • Body Bolt - M6-1.0 X 25mm
  • Support Package Quantity: 4
  • Product Attributes:
    • Bolt Grade: 9.8
    • Partial Thread: Yes
    • SAE or Metric: Metric
    • Package Contents: 4 Body Bolts
    • Washer Attached: Yes
    • Length: 25 Mm
    • Head Tool Size: 10
    • Thread Type: Coarse
    • Heat Hardened: Yes
    • Callout Size: M6 X 1.0 X 25
    • Head Drive Type: Hex
  • Features:
    • Durable materials - manufactured to specific thread tolerance standards
    • Corrosion tested - hardware undergoes salt spray testing to ensure corrosion resistance
    • Multipurpose usefulness - can be used in a variety of applications, from auto to home
    • Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
  • These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

This Part Fits the Following OEM/Substitute Numbers:
11503982, 11609989, 455930

Additional Fitment Information:
Vehicle Position
2014 - Chevrolet Silverado 2500 Upper
Showing 1 - 9 of 9 products

Loading...