2012 Chevrolet Silverado 1500 Body Parts

Choose your Part Name for your 2012 Chevrolet Silverado 1500

Accelerator Pedal Boost Module Air Horn Compressor Kit Bicycle Rack Body Mount Body Mount Cushion Brush Guard Bumper Bumper Cover Retainer Bumper Guard Bumper Guard Bracket Bumper Push Bar Bumper Step Pad Cargo Box Cargo Box Accessory Cargo Holder Cargo Management System Center Console Latch Console Trim Panel Clip Dog Box Door Hinge Door Interior Trim Panel Retainer Door Latch Assembly Door Latch Cable Door Lock Actuator Motor Door Mirror Door Mirror Cover Door Mirror Set Door Sill Plate Clip Door Window Switch Retaining Clip Electronic Multi-Purpose Gauge Exterior Door Handle Exterior Door Handle Cover Fender Extension Molding Fender Flare Fender Liner Fender Molding Fender Support Bolt Fifth Wheel Trailer Hitch Fifth Wheel Trailer Hitch Bracket Fifth Wheel Trailer Hitch Mount Kit Fifth Wheel Trailer Hitch Rail Kit Floor Liner Floor Mat Floor Mat Set Frame Crossmember Hole Plug Fuel Door Cover Gauge Pod Gooseneck Trailer Hitch Gooseneck Trailer Hitch Mount Kit Grille Grille Guard Grille Screen Hood Insulation Pad Clip Hood Light Pod Hood Scoop Interior Panel Clip Ladder Rack License Plate Bracket Liftgate Lift Support Liquid Transfer Tank Liquid Transfer Tank / Tool Box Unit Liquid Transfer Tank Pump Molding Clip Multi-Purpose Gauge Parking Aid Sensor Power Sliding Window Motor Relay Receiver Hitch Mounted Cargo Carrier Rocker Panel Rocker Panel Guard Rocker Panel Molding Roll Bar Roof Rack Roof Rack Mount Kit Running Board Running Board Mount Kit Running Board Mounting Bracket Seat Cover Seat Cushion Cover Seat Cushion Pad Side Window Deflector Skid Plate Splash Shield Retainer Step Nerf Bar Step Nerf Bar Mount Kit Step Nerf Bar Pad Sunroof Deflector Suspension Body Block Suspension Body Lift Kit Suspension Body Lowering Kit Tailgate Cap Protector Tailgate Handle Tailgate Handle Bezel Clip Tailgate Handle Cover Tailgate Light Tailgate Liner Tailgate Lock Tailgate Mat Tie Down Anchor Tow Hook Towing Mirror Towing Mirror Set Trailer Hitch Trailer Hitch Coupler Lock Trailer Hitch Lock Truck Bed Bulkhead Protector Truck Bed Drawer Truck Bed Drawer Divider Truck Bed Floor Support Truck Bed Liner Truck Bed Mat Truck Bed Mounting Hardware Truck Bed Organizer Truck Bed Rack Truck Bed Rack Base Rail Truck Bed Rack Base Rail Extension Truck Bed Rack Installation Kit Truck Bed Rail-To-Rail Tool Box Truck Bed Side Rail Truck Bed Side Rail Protector Truck Bed Side Rail Tool Box Truck Bed Stake Pocket Cover Truck Bed Storage Box Truck Bed Tailgate Extender Truck Cab Light Truck Cab Protector / Headache Rack Truck Cab Side Step Truck Cab Top Cover Truck Tool Box Truck Tool Box Lock and Key Truck Tool Box Mounting Kit Undercar Shield Clip Underseat Storage Box Wheel Arch Trim Set Wheel Housing Reinforcement Window Cover Window Regulator Window Shade Winter and Bug Grille Screen Kit

Showing 1 - 10 of 2275 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2012 Chevrolet Silverado 1500 Step Nerf Bar 8 Cyl 6.2L Westin

Dual Step Pad; Polished Stainless Steel; Mount Kit Included
E-Series 3 Round Nerf Step Bars; Dual Step Pad; Polished Stainless Steel; Mount Kit Included;
E-Series 3 Round Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Round
Features:
- Mount Kit Included
- 3 in. Round Step Bars
- Economical Step-Up Solution
- Vehicle Specific Applications
- Injection Molded Polymer Step Pad
- Recessed Step Area
- Bolt-On Installation
- No Drilling Required
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2012 - Chevrolet Silverado 1500	V	6162	8 Cyl 6.2L	LTZ	Extended Cab Pickup	376

50 In Stock

$507.48 CAD

$608.98 CAD

Brand	Westin
Part #	W1623-1680
Condition	New
Warehouse	B

2012 Chevrolet Silverado 1500 Step Nerf Bar 8 Cyl 6.2L Westin

Dual Step Pad; Polished Stainless Steel; Mount Kit Included Stainless Steel~Body Mount
E-Series 3 Round Nerf Step Bars; Dual Step Pad; Polished Stainless Steel; Mount Kit Included;
E-Series 3 Round Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Round
Features:
- Mount Kit Included
- 3 in. Round Step Bars
- Economical Step-Up Solution
- Vehicle Specific Applications
- Injection Molded Polymer Step Pad
- Recessed Step Area
- Bolt-On Installation
- No Drilling Required
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2012 - Chevrolet Silverado 1500	V	6162	8 Cyl 6.2L	LTZ	Extended Cab Pickup	376

50 In Stock

$507.48 CAD

$608.98 CAD

Brand	Westin
Part #	W1623-1680
Condition	New
Warehouse	B

2012 Chevrolet Silverado 1500 Running Board Westin

Black Aluminum; 79 in. Length; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately Black~No Drilling Required~Requires Installation Kit 27-1745
Sure-Grip Running Boards; Black Aluminum; 79 in. Length; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately;
Sure-Grip Running Boards
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
Features:
- Vehicle Specific Mount Kit Required
- Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards. 5 year warranty.

Additional Fitment Information:

Vehicle	Sub Model	Body
2012 - Chevrolet Silverado 1500	LTZ	Extended Cab Pickup

107 In Stock

$509.92 CAD

$611.90 CAD

Brand	Westin
Part #	W1627-6135
Condition	New
Warehouse	B

2012 Chevrolet Silverado 1500 Truck Bed Liner BedRug

BEDRUG 07-18 (19 LEGACY/LIMITED) GM SILVERADO/SIERRA 6ft. 6in. BED
3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/o Cargo Channel System
BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/o Cargo Channel System;
BedRug® Complete Truck Bed Liner
Product Attributes:
- Instructions Included: Yes
- Surface Preparation Required: Yes
- Estimated Install Time (Hour): 0.20 - 0.50
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Configuration: Multi Piece
- Length: 68.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Width: 15.000 In.
- Mounting: Under Bed Rail And Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
  - 100% Polypropylene/ultra Tough Work Surface
  - Bleach/battery Acid/oil And Gas Wash Right Off
  - Custom Fit For Each Truck/wont Scratch Truck Bed
  - Designed For Exterior Use/will Not Absorb Water
  - Installs In Minutes With Hook And Loop Fastener
  - Limited Lifetime Warranty
  - Looks And Feels Like Carpet
  - Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Shifter Handle Included: Includes Tailgate Mat
- Paintable: No
- Tailgate Cover Included: Yes
- Chemical Resistance: Yes
- Drilling Required: No
- Kit Contents: Full Truck Bed Liner & Built In Tailgate Mat
- Install Method: No Drill; Hook And Loop
- Item Height: 15.000 In.
Features:
- If Installing A Bedrug Over A Spray-In Bedliner
- Supplemental Installation Kit -Brzsprayon- Is Required
Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!

Additional Fitment Information:

Vehicle	Bed	Bed Length	Sub Model
2012 - Chevrolet Silverado 1500	Fleetside	78.9	LTZ

3 In Stock

$649.99 CAD

$779.99 CAD

Brand	BedRug
Part #	BRC07SBK
Condition	New
Warehouse	C

2012 Chevrolet Silverado 1500 Floor Mat Set - Front and Rear Husky Liners

Front/2nd Seat Floor Liners (Footwell Coverage)
Black; 3 pc.; w/o Manual 4x4 Transfer Case Shifter
WB FR/2ND SEAT FLOOR LNER-FW
WeatherBeater(TM) Floor Liner
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.

Additional Fitment Information:

Vehicle	Position	Sub Model	Body
2012 - Chevrolet Silverado 1500	Front and Rear	XFE	Crew Cab Pickup

1 In Stock

$266.11 CAD

$319.33 CAD

Brand	Husky Liners
Part #	98201
Condition	New
Warehouse	C

2012 Chevrolet Silverado 1500 Trailer Hitch - Rear 8 Cyl 6.2L CURT

Class 3 Hitch; 2in. Receiver; Select Silverado; Sierra 1500 (Concealed Main Body
6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
CURT 13301 Class 3 Trailer Hitch; 2-In Receiver; Concealed Main Body; Fits Select Chevrolet Silverado; GMC Sierra 1500
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 1500, LD, Limited and GMC Sierra 1500, LD, Limited (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2012 - Chevrolet Silverado 1500	V	6162	Rear	8 Cyl 6.2L	376

25 In Stock

$316.62 CAD

$379.94 CAD

Brand	CURT
Part #	13301
Condition	New
Warehouse	C

2012 Chevrolet Silverado 1500 Step Nerf Bar 8 Cyl 6.2L Westin

Black; Steel; 75 in.; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately;Requires Nerf/Step Bar Mount Kit PN[22-1085]
Premier 4 Oval Nerf Step Bars; Black; Steel; 75 in.; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately;
Premier 4 Oval Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Oval
Features:
- Vehicle Specific Mounting Kit Required
- Sold Separately
- 4 in. Oval Tube
- Injection Molded Polymer Step Pad
- Molded Oval End Caps
- Bolt-On Installation
- No Drilling Required
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish. 3 year warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2012 - Chevrolet Silverado 1500	V	6162	8 Cyl 6.2L	LTZ	Extended Cab Pickup	376

69 In Stock

$326.01 CAD

$391.21 CAD

Brand	Westin
Part #	W1622-5025
Condition	New
Warehouse	B

2012 Chevrolet Silverado 1500 Step Nerf Bar 8 Cyl 6.2L Westin

Black; Steel; 75 in.; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately;Requires Nerf/Step Bar Mount Kit PN[22-1085] 4 in. Step~75 in. Long~Black~Excludes Canadian Diesel~Requires Installation Kit 22-1085~Body Mount
Premier 4 Oval Nerf Step Bars; Black; Steel; 75 in.; Does Not Include Mount Kit; Vehicle Specific Mount Kit Must Be Purchased Separately;
Premier 4 Oval Nerf Step Bars
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Cancer And Birth Defect
- Tube Shape: Oval
Features:
- Vehicle Specific Mounting Kit Required
- Sold Separately
- 4 in. Oval Tube
- Injection Molded Polymer Step Pad
- Molded Oval End Caps
- Bolt-On Installation
- No Drilling Required
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish. 3 year warranty.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	Body	CID
2012 - Chevrolet Silverado 1500	V	6162	8 Cyl 6.2L	LTZ	Extended Cab Pickup	376

69 In Stock

$326.01 CAD

$391.21 CAD

Brand	Westin
Part #	W1622-5025
Condition	New
Warehouse	B

2012 Chevrolet Silverado 1500 Fender Flare - Front and Rear Bushwacker

4 pc.; Front Tire Coverage 2 in.; Front Height 6.75 in.; Rear Tire Coverage 2 in; Rear Height 7 in.; Smooth Finish; Black
Pocket Style® Fender Flares; 4 pc.; Front Tire Coverage 2 in.; Front Height 6.75 in.; Rear Tire Coverage 2 in; Rear Height 7 in.; Smooth Finish; Black;
Pocket Style® Fender Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: No
Features:
- Installs Easily With Little To No Drilling/Trimming Required - All Hardware Is Included
- Limited Lifetime Warranty
- Precision Engineered For A Perfect Fit That Provides The Rugged Look Of Bolted-On Flares w/o Drilling Through The Body
- Tire Coverage Varies With Vehicle 0.5 in.- 3 in.
- Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- Made Of Durable - Yet Flexible Dura-Flex 2000 ABS Material
With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish theyre UV protected so they wont chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, its in the pocket. Pocket Style Fender Flares from Bushwacker.

Additional Fitment Information:

Vehicle	Position	Bed	Bed Length	Sub Model
2012 - Chevrolet Silverado 1500	Front and Rear	Fleetside	97.8	LTZ

4 In Stock

$799.83 CAD

$959.80 CAD

Brand	Bushwacker
Part #	40924-02
Condition	New
Warehouse	C

2012 Chevrolet Silverado 1500 Fender Flare - Front and Rear Bushwacker

Pocket Style® Fender Flares
4 pc.; Front Tire Coverage 2 in.; Front Height 6.75 in.; Rear Tire Coverage 2 in; Rear Height 7 in.; Smooth Finish; Black
Pocket Style® Fender Flares; 4 pc.; Front Tire Coverage 2 in.; Front Height 6.75 in.; Rear Tire Coverage 2 in; Rear Height 7 in.; Smooth Finish; Black;
Pocket Style(R) Fender Flares
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: No
Features:
- Installs Easily With Little To No Drilling/Trimming Required - All Hardware Is Included
- Limited Lifetime Warranty
- Precision Engineered For A Perfect Fit That Provides The Rugged Look Of Bolted-On Flares w/o Drilling Through The Body
- Tire Coverage Varies With Vehicle 0.5 in.- 3 in.
- Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
- 100 Percent UV Protected Smooth Matte Black Smooth Finish Can Be Easily Painted
- Made Of Durable - Yet Flexible Dura-Flex 2000 ABS Material
With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish theyre UV protected so they wont chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, its in the pocket. Pocket Style Fender Flares from Bushwacker.