2010 Chevrolet Express 3500 Driveline and Axles Parts

Showing 1 - 10 of 193 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2010 Chevrolet Express 3500 Drive Axle Shaft Flange Gasket - Rear FelPro

Axle Flange Gasket
with 8 Bolt Holes 2-23/32in Inside Diameter x 4-7/16in Outside Diameter
FEL-PRO 55350 Axle Flange Gasket
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:

12471641, 327739, 37013, 7429210, 76-0002, DS14243, J17829

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

12 In Stock

$7.55 CAD

$9.06 CAD

Brand	FelPro
Part #	F1055350
Condition	New
Warehouse	B

UPC: 084113870538

2010 Chevrolet Express 3500 Differential Cover Gasket - Rear FelPro

Differential Cover Gasket
with 14 Bolt Holes with 10.5in Ring Gear ; AAM
FEL-PRO RDS 55063 Differential Cover Gasket
Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:

26012845, 26067159, 36031, 3977387, DS14223, P28128

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

1 In Stock

$12.60 CAD

$15.12 CAD

Brand	FelPro
Part #	F10RDS 55063
Condition	New
Warehouse	B

UPC: 084113715730

2010 Chevrolet Express 3500 Differential - Rear Auburn Gear

Auburn Gear Ected Max Differential
Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down
Auburn Gear Ected Max Differential; Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down;
Auburn Gear Ected Max
Features:
- Selectable Full Locker And Limited Slip In One Unit
- Can Be Engaged/Disengaged At Any Reasonable Speed
- Smooth Quiet Operation
- Can Be Use With Or Without Lockout Hubs
- Made From 9310 Heat Treated Billet Steel
- Backed By 1 Year Warranty
- Covered w/4 Year Differential-Replacement Exchange
- Made In The USA
The ECTED Max is a selectable traction device; an on/off switch is mounted near the driver. When off–the clutch pack,located behind the side gear provides the limited slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed and thereby providing bias torque to the high traction wheel–your performance limited slip differential action. When selected on, current is sent to the electromagnetic coil. The coil is retained by a clip that fits over one of the bearing cap bolts, making it non-rotational. The coil rides on a ball bearing. The ball bearings spin with the differential case. The coil creates a magnetic flux so that the pilot cone is pulled into engagement with the differential case. This frictional engagement causes the bearing balls to ride up on a ramp machined into the side gear. This radial travel of the balls also causes lateral movement of the side gear. This applies a force onto the center block. The center block has an elongated hole that the center pin fits through, allowing it to float. The center block applies force to the opposite side gear, compressing the clutch pack giving the user a solid axle assembly–the spool/locker performance you desire at the strip/off-road. ECTED Max gearing is made from aircraft quality, 9310 heat-treated billet steel. Tough as nails! ECTED Max can be switched on or off on the fly, at any road speed. ECTED Max does not have any shift forks or pins that must be lined up to obtain locker mode. ECTED Max is quiet. Good-bye to noisy lockers! ECTED Max is backed by industry-leading 1 year warranty, like all Auburn Gear Performance Differentials. ECTED Max is backed by the industry-exclusive program. D-REX=Differential–Replacement EXchange Program. ECTED Max can be used in front axle applications–with or w/out lockout hubs. ECTED Max is the only selectable locker offering both limited slip and locker modes. Forget the rest-go with the best!

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

2 In Stock

$2,015.06 CAD

$2,418.07 CAD

Brand	Auburn Gear
Part #	A52545035
Condition	New
Warehouse	B

2010 Chevrolet Express 3500 Differential Ring and Pinion - Rear Motive Gear

For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 9.5
- Ring Gear Diameter: 9.5
- Ring & Pinion Gear Ratio: 3.42
- Pinion Shaft Diameter: 1.876
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 3.42 Ratio And Higher
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 12
- Ring Gear Tooth Quantity: 41
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

1-2010-342, 14038000, 20914868, 24502, 26015981, 26016526, 26058344, 26060559, 40051784, 40173817, 743B730, 84032508, G895342, GM9.5-342-NG, GM95342, SGM9501, YG GM9.5-342

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

45 In Stock

$511.07 CAD

$613.28 CAD

Brand	Motive Gear
Part #	M92GM9.5-342
Condition	New
Warehouse	B

UPC: 00698231020975

2010 Chevrolet Express 3500 Differential Bearing Kit - Rear Motive Gear

Differential Master Bearing Kit - Koyo
For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
Motive Gear - Differential Master Bearing Kit - Koyo
Differential Bearing Kit
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

388K, 83-1065-1, K35-2023B, R14RLAMKHT, XL-1065-1, ZK GM14T-C

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

42 In Stock

$349.15 CAD

$418.98 CAD

Brand	Motive Gear
Part #	M92R14RLAMKH
Condition	New
Warehouse	B

UPC: 00698231649350

2010 Chevrolet Express 3500 Differential Ring and Pinion - Rear Motive Gear

For GM 10.5" (14 Bolt); 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 4.10
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 11
- Ring Gear Tooth Quantity: 45
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

1-2023-410, 2-2023-410, 20920669, 24135, 26014193, 26029468, 26029846, 26054993, 40010712, 40070463, 471872, 744A730B, GM105410, GM14T-410-NG, SGM10502, YG GM14T-411

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

29 In Stock

$683.25 CAD

$819.90 CAD

Brand	Motive Gear
Part #	M92GM10.5-410
Condition	New
Warehouse	B

UPC: 00698231019962

2010 Chevrolet Express 3500 Differential Ring and Pinion - Rear Motive Gear

For GM 10.5" (14 Bolt); 3.75 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier
Motive Gear - Differential Ring and Pinion
Differential Ring and Pinion
Product Attributes:
- California Proposition 65: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Differential Case Design Type: Gm 10.5
- Ring Gear Diameter: 10.5
- Ring & Pinion Gear Ratio: 3.75
- Pinion Shaft Diameter: 1.75
- Ring Gear Material: 8620 Steel
- Ring Gear Rotation: Standard
- Ring Gear Bolt Quantity: 12
- Differential Carrier Break: 4.10 Ratio And Lower
- Pinion Spline Count: 30
- Cover Bolt Quantity: 14
- Pinion Gear Tooth Quantity: 12
- Ring Gear Tooth Quantity: 45
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Part Fits the Following OEM/Substitute Numbers:

1-2023-373, 12471291, 2-2023-373, 24134, 26014192, 26054996, 327721, 40010707, 40058731, 471871, 744A730A, GM105373, GM14T-373-NG, SGM10501, YG GM14T-373

Additional Fitment Information:

Vehicle	Position
2010 - Chevrolet Express 3500	Rear

42 In Stock

$683.25 CAD

$819.90 CAD

Brand	Motive Gear
Part #	M92GM10.5-373
Condition	New
Warehouse	B

UPC: 00698231019948

2010 Chevrolet Express 3500 Differential Cover - Rear BD Diesel

w/AA 14 Bolt-11.5 in. Differential; Includes Differential Cover/O-Ring Gasket/Bolt/Washer/Drain Plug/Plug -10 ORB
Differential Cover; Rear; w/AA 14 Bolt-11.5 in. Differential; Includes Differential Cover/O-Ring Gasket/Bolt/Washer/Drain Plug/Plug -10 ORB;
Differential Cover
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
Features:
- Engineered Cover Design Keeps Oil On The Gears
- Deflects Oil Back Onto The Ring Gear
- Deflects Oil Back Into Pinion Gear For Cooler Longer Life
- Extra Capacity Sump Located At Bottom For Gears To Pick Up Oil
- Internal And External Cooling Fins
- Stainless Steel Allen Head Cap Bolts Fill Plug
- Magnetic Drain Plug
- Gasketless Cover Has Integral Reusable Vinton O-Ring
- 36 Month/150000 Mile Limited Warranty
Other differential covers are large and bulky resulting in lubricating oil being flung off the ring gear. BD's design deflects the oil back onto the ring gear and into the pinion gear for cooler longer life.

Additional Fitment Information:

Vehicle	Position	Sub Model
2010 - Chevrolet Express 3500	Rear	Base

9 In Stock

$509.52 CAD

$611.42 CAD

Brand	BD Diesel
Part #	B701061825
Condition	New
Warehouse	B

2010 Chevrolet Express 3500 Universal Joint - Rear Driveshaft at Support Bearing 8 Cyl 4.8L Spicer

Universal Joint
with 2 Piece Rear Drive Shaft with 4.188in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter 2 Piece Driveshaft Non-Greasable
HGVF
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 4.188
- Snap Ring (2): 4.188
- Length B (mm): 106.4
- SR(2)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 4.188
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1410/spl36
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 4.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 106.4
- SR(1)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Diameter A (mm): 1.188
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:

15-160X, 2-0054, 2-0054G, 2-0054P, 2-0801, 295, 330, 45U0300, 45U0304, 45U4052, 471, 5-160X, UJ295, UJ330

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Wheel FeedBase	CID
2010 - Chevrolet Express 3500	V	-	Rear Driveshaft at Support Bearing	8 Cyl 4.8L	159.0	294

24 In Stock

$63.63 CAD

$76.36 CAD

Brand	Spicer
Part #	DSP5-1410X
Condition	New
Warehouse	B

2010 Chevrolet Express 3500 Universal Joint - Rear Driveshaft at Rear Axle 8 Cyl 4.8L Spicer

Universal Joint
with 4.188in Outside Snap Ring Dimension with Dual Rear Wheels (DRW) 1 Piece Driveshaft 1.188in Bearing Cap Diameter Non-Greasable
HGVF
Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 4.188
- Snap Ring (2): 4.188
- Length B (mm): 106.4
- SR(2)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 4.188
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1410/spl36
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 4.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 106.4
- SR(1)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Diameter A (mm): 1.188
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.