1965 Jeep J 310 Engine Parts

Choose your Part Name for your 1965 Jeep J-310

Engine Crankshaft Lock Key Engine Oil Filter Engine Piston Ring Set Engine Valve Spring Retainer Keeper Engine Valve Stem Oil Seal

Showing 1 - 10 of 12 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1965 Jeep J-310 Engine Oil Filter 8 Cyl 5.3L Fram

FRAM, PH11, Oil Filter
Spin-on Oil Filter If space is not restricted
Extra Guard
Product Attributes:
- Gasket Inside Diameter: 2.420
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 200.000
- Gasket Material: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Marine Approved: No
- Outside Diameter: 3.813
- Gasket Outside Diameter: 2.790
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:

57026, 662, 7026, A17, AL3950, AOF-160, HF929, LF136, PF1127

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	V	5358	8 Cyl 5.3L	327

3 In Stock

$15.56 CAD

$18.67 CAD

Brand	Fram
Part #	F24PH11
Condition	New
Warehouse	B

UPC: 009100380098

1965 Jeep J-310 Engine Oil Filter 6 Cyl 3.8L Fram

FRAM, PH8A, Oil Filter
Spin-on Oil Filter
Extra Guard
Product Attributes:
- Burst Pressure: 230.000
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12.000
- Marine Approved: No
- Outside Diameter: 3.797
- Non Slip Grip: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- Micron Rating: 8.000
- Torque Nut: No
FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:

3645, 3I-1412, 6018, F76006, FF833, TP1049

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	L	3770	6 Cyl 3.8L	230

56 In Stock

$13.68 CAD

$16.42 CAD

Brand	Fram
Part #	F24PH8A
Condition	New
Warehouse	B

UPC: 009100380081

1965 Jeep J-310 Engine Piston Ring Set 8 Cyl 5.3L Sealed Power

Engine Piston Ring Set
Premium Ring Groove Widths: 5/64in , 5/64in , 3/16in Moly Steel Top Ring Ductile 2nd Ring Standard
Sealed Power E-251K Premium Piston Ring Set
Product Attributes:
- Bore Size (mm): 101.60
- Radial Wall Thickness - Top (in): 0.145
- 2nd Ring Width (in): 5/64
- File Fit (Y/N): N
- Standard Size: Standard Size
- File Fit: No
- Top Ring Width (in): 5/64
- 2nd Ring Material: Grey Iron W/phosphate Coating
- Top Ring Face Design: Barrel Face
- Ring Set Groove Widths (in): 5/64 X 5/64 X 3/16
- Oil Ring Design: 3 Piece Flex Vent
- Top Ring Material:
  - Steel W/moly
  - Steel With Moly
- Oil Ring Width (in): 3/16
- Outside Diameter: 4.0000
- Bore Size (in): 4.0000
- 2nd Ring Face Design: Reverse Torsional
- Bore Diameter:
  - 101.60
  - 4.0000
- Top Ring Radial Wall Thickness: 0.145
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.

This Part Fits the Following OEM/Substitute Numbers:

1389176, 210-6114, 251K, 2M139, 3205941, 3549588, 3579044, 3780016, 3799438, 3839510, 3892364, 3893202, 40564, 40564CP, 474170, 6474170, 8271, E-251K...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	V	5358	8 Cyl 5.3L	327

4 In Stock

$106.21 CAD

$127.45 CAD

Brand	Sealed Power
Part #	S12E-251K
Condition	New
Warehouse	B

UPC: 053059132604

1965 Jeep J-310 Engine Piston Ring Set 8 Cyl 5.3L Sealed Power

Engine Piston Ring Set
Premium Ring Groove Widths: 5/64in , 5/64in , 3/16in Moly Steel Top Ring Ductile 2nd Ring 0.030in Oversize
Sealed Power E-251K 30 Premium Piston Ring Set
Product Attributes:
- Radial Wall Thickness - Top (in): 0.145
- 2nd Ring Width (in): 5/64
- File Fit (Y/N): N
- File Fit: No
- Top Ring Width (in): 5/64
- 2nd Ring Material: Grey Iron W/phosphate Coating
- Top Ring Face Design: Barrel Face
- Ring Set Groove Widths (in): 5/64 X 5/64 X 3/16
- Oil Ring Design: 3 Piece Flex Vent
- Top Ring Material: Steel W/moly
- Oil Ring Width (in): 3/16
- Oversize (in): 0.030
- Oil Ring Tension: Standard
- Oversized Amount: 0.030
- Bore Size (in): 4.0300
- 2nd Ring Face Design: Reverse Torsional
- Bore Diameter: 4.0300
- Top Ring Radial Wall Thickness: 0.145
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.

This Part Fits the Following OEM/Substitute Numbers:

210-6114030, 251K.030, 2M139-30, 2M139030, 40007.030, 40564030, 40564CP030, E-251K 30, T8325MX30

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	V	5358	8 Cyl 5.3L	327

12 In Stock

$106.21 CAD

$127.45 CAD

Brand	Sealed Power
Part #	S12E-251K 30
Condition	New
Warehouse	B

UPC: 053059132628

1965 Jeep J-310 Engine Valve Stem Oil Seal 6 Cyl 3.8L Crown Automotive

0.015 in. Oversize
Valve Stem Seal; 0.015 in. Oversize;
Valve Stem Seal
Product Attributes:
- WARNING CA Proposition 65: No
- Diameter (in.): Oem
Features:
- Valve Stem Seal
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	L	3770	6 Cyl 3.8L	230

3 In Stock

$2.34 CAD

$2.81 CAD

Brand	Crown Automotive
Part #	C1YJ3218977
Condition	New
Warehouse	B

1965 Jeep J-310 Engine Valve Spring Retainer Keeper 6 Cyl 3.8L Crown Automotive

Valve Spring Retainer Keeper;
Valve Spring Retainer Keeper
Product Attributes:
- WARNING CA Proposition 65: No
- Lock Angle: 7 Degree
Features:
- Valve Spring Retainer Keeper
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	L	3770	6 Cyl 3.8L	230

4 In Stock

$4.98 CAD

$5.98 CAD

Brand	Crown Automotive
Part #	C1YJ3156157
Condition	New
Warehouse	B

1965 Jeep J-310 Engine Crankshaft Lock Key Crown Automotive

Timing Sprocket Woodruff Key;
Timing Sprocket Woodruff Key
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Timing Sprocket Woodruff Key
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
1965 - Jeep J-310

8 In Stock

$2.91 CAD

$3.49 CAD

Brand	Crown Automotive
Part #	C1YJ3107002
Condition	New
Warehouse	B

1965 Jeep J-310 Engine Oil Filter 6 Cyl 3.8L Fram

FRAM, HP1, Oil Filter
FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
Product Attributes:
- Non Slip Grip: No
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 3.672
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.

This Part Fits the Following OEM/Substitute Numbers:

3120MP, 33120, 86120MP, BF7613, BF992, FF204

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1965 - Jeep J-310	L	3770	6 Cyl 3.8L	230

Brand	Fram
Part #	F24HP1
Condition	New
Warehouse	B

UPC: 009100752307

1965 Jeep J-310 Engine Oil Filter 8 Cyl 5.3L Wix

WIX Spin-On Lube Filter
Manufacturer OE Recommended Oil Change Intervals
Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.660
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 345
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:

1000272, 103, 105, 1115401, 125, 1258, 168108130, 1717286, 2062660, 21258, 222, 2224504, 2258, 25, 313, 3215877, 3222897, 3222899...VIEW MORE

Additional Fitment Information:

Vehicle	Block	CC	Region	Engine	CID
1965 - Jeep J-310	V	5358	United States	8 Cyl 5.3L	327

Brand	Wix
Part #	W6851258
Condition	New
Warehouse	B

UPC: 765809512580

1965 Jeep J-310 Engine Oil Filter 8 Cyl 5.3L K&N

Oil Filter
H-4.688 in.; OD-3.781 in.; 13/16 in.-16 UNS Thread; w/o psi Relief Valve
K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
Performance Gold Oil Filter
Product Attributes:
- Thread Size: 0.8125 In. - 16 Uns
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Canister
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 4.880 In. (124mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.810 In. (97 Mm)
- Package Material: Paperboard
- Product Box Length: 3.810 In. (97mm)
- PSI Relief Valve: No
- Outside Diameter: 3.781 In. (96mm)
- Removal Nut: Yes
- Item Height: 4.688 In. (119mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.