2010 Porsche 911 Engine Parts

Choose your Part Name for your 2010 Porsche 911

Air Charge Temperature Sensor Engine Auxiliary Shaft Bearing Engine Balance Shaft Bearing Engine Camshaft Follower Engine Camshaft Plug Engine Camshaft Seal Engine Connecting Rod Bearing Set Engine Connecting Rod Bolt Engine Connecting Rod Nut Engine Crankcase O-Ring Engine Crankshaft Seal Engine Crankshaft Thrust Washer Engine Cylinder Head Bolt Engine Cylinder Head Gasket Engine Cylinder Liner O-Ring Engine Intake Manifold Gasket Engine Intake Manifold Sleeve Engine Mount Engine Oil Drain Plug Engine Oil Drain Plug Gasket Engine Oil Filler Cap Engine Oil Filler Cap Gasket Engine Oil Filler Tube Gasket Engine Oil Filler Tube Seal Engine Oil Filter Engine Oil Filter Adapter O-Ring Engine Oil Filter Cover Engine Oil Filter Gasket Engine Oil Filter Housing Cover O-Ring Engine Oil Filter Housing O-Ring Engine Oil Filter Kit Engine Oil Level Sensor Engine Oil Level Sensor O-Ring Engine Oil Level Sensor Seal Engine Oil Line O-Ring Engine Oil Pan Gasket Engine Oil Pressure Relief Valve Engine Oil Pressure Switch Engine Oil Pump Chain Engine Oil Pump Drive Shaft Engine Oil Pump Seal Engine Oil Separator Engine Oil Temperature Sender Engine Timing Chain Engine Timing Chain Guide Engine Timing Chain Guide Bolt Seal Engine Timing Chain Kit Engine Timing Chain Tensioner Engine Timing Chain Tensioner Guide Engine Timing Cover Gasket Engine Timing Sprocket Bolt Engine Valve Cover Gasket Engine Valve Spring Engine Valve Stem Oil Seal Engine Variable Valve Timing (VVT) Adjuster Seal Engine Variable Valve Timing (VVT) Oil Control Valve Engine Variable Valve Timing (VVT) Solenoid Engine Variable Valve Timing (VVT) Solenoid Gasket

Showing 1 - 10 of 121 products
Image
SKU
Product
Rating
Price

Mahle
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Insert
  • with 91 X 4mm Seal

Additional Fitment Information:
Vehicle Engine Designation
2010 - Porsche 911 MA1.01

Mahle
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Insert
  • with O-Ring

Additional Fitment Information:
Vehicle Engine Designation
2010 - Porsche 911 9777

MTC
Additional Fitment Information:
Vehicle Engine Designation
2010 - Porsche 911 MA1.01

CRP
Additional Fitment Information:
Vehicle
2010 - Porsche 911

Victor Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 85 X 105 X 11mm

Additional Fitment Information:
Vehicle Position Engine Designation
2010 - Porsche 911 Rear MA1.01

Hengst
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Insert
  • OEM - with O-Ring

Additional Fitment Information:
Vehicle Engine Designation
2010 - Porsche 911 9777

Victor Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle
2010 - Porsche 911

Victor Reinz
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 42 X 4mm - O-Ring

Additional Fitment Information:
Vehicle Aspiration
2010 - Porsche 911 Naturally Aspirated

Wix
  • WIX Cartridge Lube Metal Free Filter
  • Factory filled synthetic oil - WIX XP or WIX Premium; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Outer Diameter Top: 2.559
    • Duty Type: Ld
    • Micron: 28.00
    • Style: Cartridge Lube Metal Free Filt
    • Media Material: Cellulose
    • Outer Diameter Bottom: 2.559
    • Class: B
    • Inner Diameter Bottom: 0.950
  • WIX Cartridge Oil Filters provide excellent engine protection using conventional and synthetic (when recommended by the OE vehicle manufacturer) motor oil for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, interstate travel, throughout the OE manufactures recommended oil and filter change interval. WIX filters are recommended for OEM oil and filter change intervals.

This Part Fits the Following OEM/Substitute Numbers:
0 986 AF0 238, 0 986 AF1 133, 041-8109, 1 457 429 144, 14037, 25.165.00, 27211, 4577-OX, 5001204151, 57211, 586564, 618-57211, 67211, 7211, 72207, 72207WS, 725, 84211...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine Aspiration CID
2010 - Porsche 911 H 3824 Canada 6 Cyl 3.8L Turbocharged -

K&N
  • Oil Filter
  • H-4.25 in.; OD-3.219 in.
  • K/N Performance Silver Cartridge Oil Filters are constructed with a high flow design that helps to improve engine performance by reducing oil filter restriction.
  • High Flow Oil Filter
  • Product Attributes:
    • Thread Size: N/a
    • WARNING CA Proposition 65: No
    • Bypass Valve: No
    • Style: Cartridge
    • Item Weight: 0.300 Lbs. (0.1 Kg)
    • Product Box Height: 4.440 In. (113mm)
    • Filter Material: High Flow Premium Media
    • Inside Diameter: 1.500 In. (38mm)
    • Gasket Material: Nitrile Rubber
    • Product Box Width: 3.440 In. (87 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.440 In. (87mm)
    • PSI Relief Valve: No
    • Outside Diameter: 3.219 In. (82mm)
    • Removal Nut: No
    • Item Height: 4.250 In. (108mm)
    • Package Type: Box
    • Anti-Drain Back Valve: No
  • Features:
    • Designed To Improve Performance
    • Designed For Synthetic/Conventional/Blended Oils
    • Premium Filtration Media For Increased Capacity
    • Helps Improve Engine Performance by Reducing Oil Restriction
  • K&N Performance Silver Cartridge Oil Filters are constructed with a high flow design that helps to improve engine performance by reducing oil filter restriction. K&N Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life and are engineered to handle virtually all grades of synthetic, conventional and blended motor oils. The pleated media provides high filtration capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation.

This Part Fits the Following OEM/Substitute Numbers:
0410838, 11427834734, 11427840594, 57694, 7694, 84694, 94810722200, 9A2107222500, CF5691, CH11038, E113HD235, E11H02D155, HU821X, HU9001X, L25691, L411, OX254D2ECO, OX254D4ECO...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2010 - Porsche 911 H 3800 6 Cyl 3.8L Targa 4S -
Showing 1 - 10 of 121 products

Loading...