2006 Audi S4 Exhaust Parts

Choose your Part Name for your 2006 Audi S4

Catalytic Converter Exhaust Bracket Exhaust Manifold Gasket Exhaust Muffler Bracket Exhaust System Hanger

Showing 1 - 10 of 13 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2006 Audi S4 Catalytic Converter - Rear Left 8 Cyl 4.2L Magnaflow

Universal Catalytic Converter - 2.00in.
Cutting and Welding Required During Installation
Universal Catalytic Converter - 2.00in.
Universal OEM GRADE Federal (Excludes California)
Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.25
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2006 - Audi S4	V	4163	Rear Left	8 Cyl 4.2L	-

10 In Stock

$311.57 CAD

$373.88 CAD

Brand	Magnaflow
Part #	M6651204
Condition	New
Warehouse	B

UPC: 00841380069269

2006 Audi S4 Catalytic Converter - Rear Right 8 Cyl 4.2L Magnaflow

Universal Catalytic Converter - 2.00in.
Cutting and Welding Required During Installation
Universal Catalytic Converter - 2.00in.
Universal OEM GRADE Federal (Excludes California)
Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.25
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2006 - Audi S4	V	4163	Rear Right	8 Cyl 4.2L	-

10 In Stock

$311.57 CAD

$373.88 CAD

Brand	Magnaflow
Part #	M6651204
Condition	New
Warehouse	B

UPC: 00841380069269

2006 Audi S4 Catalytic Converter - Rear Right 8 Cyl 4.2L Magnaflow

Universal Catalytic Converter - 2.00in.
Cutting and Welding Required During Installation
Universal Catalytic Converter - 2.00in.
Universal HM Grade Federal (Excludes CA)
Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2006 - Audi S4	V	4163	Rear Right	8 Cyl 4.2L	-

25 In Stock

$285.60 CAD

$342.72 CAD

Brand	Magnaflow
Part #	M6699204HM
Condition	New
Warehouse	B

UPC: 00841380031426

2006 Audi S4 Catalytic Converter - Rear Left 8 Cyl 4.2L Magnaflow

Universal Catalytic Converter - 2.00in.
Cutting and Welding Required During Installation
Universal Catalytic Converter - 2.00in.
Universal HM Grade Federal (Excludes CA)
Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2006 - Audi S4	V	4163	Rear Left	8 Cyl 4.2L	-

25 In Stock

$285.60 CAD

$342.72 CAD

Brand	Magnaflow
Part #	M6699204HM
Condition	New
Warehouse	B

UPC: 00841380031426

2006 Audi S4 Exhaust System Hanger Vaico

2006 Audi S4 Exhaust System Hanger Vaico

Center Muffler/Rubber Retaining Ring

Additional Fitment Information:

Vehicle
2006 - Audi S4

Brand	Vaico
Part #	VCO1638601
Condition	New
Warehouse	A

2006 Audi S4 Exhaust Manifold Gasket Elring

2006 Audi S4 Exhaust Manifold Gasket Elring

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle
2006 - Audi S4

Brand	Elring
Part #	ELR1736350
Condition	New
Warehouse	A

2006 Audi S4 Exhaust Muffler Bracket Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
w/o RS4

Additional Fitment Information:

Vehicle	Sub Model
2006 - Audi S4	Avant

Brand	Genuine
Part #	OES1737741
Condition	New
Warehouse	A

2006 Audi S4 Exhaust Bracket Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Located by Front of Center Muffler

Additional Fitment Information:

Vehicle
2006 - Audi S4

Brand	Genuine
Part #	OES1737741
Condition	New
Warehouse	A

2006 Audi S4 Exhaust Muffler Bracket Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Sub Model
2006 - Audi S4	Cabriolet

Brand	Genuine
Part #	OES1737741
Condition	New
Warehouse	A

2006 Audi S4 Catalytic Converter - Rear Left 8 Cyl 4.2L MagnaFlow Performance Exhaust

OEM Grade Universal Catalytic Converter-2.00in.
OEM Grade Series; 2 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
Universal Catalytic Converter-2.00in.
Universal-Fit Catalytic Converter
Product Attributes:
- Inlet Diameter: 2.000 In.
- WARNING CA Proposition 65: No
- Body Width: 4.250 In.
- Outlet Attachment Type: Weld-on
- Recommended Use: Converter
- Body Material: Stainless Steel
- Heat Shield Included: Yes
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- Body Length: 9.000 In.
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- Outlet Diameter: 2.000 In.
- Oxygen Sensor Location: None
- Heat Shield Attached: Yes
- Overall Length: 13.000 In.
- Subtitles: Federal / Epa Compliant
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: 2.000 In.
- Main Piping Diameter: 2.000 In.
- Converter Body Size: Oem
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Body Shape: Round
- Core Substrate Material: Ceramic
- Sensor Port Count: 0
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
- Outlet Type: Weld-on
Features:
- Stainless Steel Construction
- Federal Emissions Compliant Designed
- Meets EPA Requirements
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.