2011 Audi CURT Parts

Choose a Model for your 2011 Audi

A3 A3 Quattro A4 A4 Quattro A5 A5 Quattro A6 A6 Quattro Q5 Q7

Showing 1 - 10 of 23 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2011 Audi Q7 Trailer Hitch - Rear 6 Cyl 3.0L CURT

Class 3 Hitch; 2in. Receiver; Select Audi Q7; Porsche Cayenne; Volkswagen Touare
6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 90 Minutes
CURT 13220 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Audi Q7; Porsche Cayenne; Volkswagen Touareg
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 90 Minutes
- WC Tongue Weight: 600
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q7, Porsche Cayenne and Volkswagen Touareg (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2011 - Audi Q7	V	2995	Rear	6 Cyl 3.0L	Premium Plus	-

1 In Stock

$436.74 CAD

$524.09 CAD

Brand	CURT
Part #	13220
Condition	New
Warehouse	C

2011 Audi Q7 Trailer Wire Converter CURT

4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Includes Powered Converter Wiring Kit PN[55152]
CURT 59236 Weather-Resistant Multi-Function Splice-in Trailer Tail Light Converter Kit; 4-Pin Wiring Harness
Multi-Function Taillight Converter Kit
Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microprocessor that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package includes a powered converter wiring kit #55152 and four snap locks for faster, more secure splicing.

Additional Fitment Information:

Vehicle
2011 - Audi Q7

22 In Stock

$110.50 CAD

$132.60 CAD

Brand	CURT
Part #	59236
Condition	New
Warehouse	C

2011 Audi Q5 Trailer Hitch - Rear 4 Cyl 2.0L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Audi Q5; Porsche Macan
5000lbs. Gross Trailer Weight; 750lbs. Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 45 Minutes~Minor Fascia Trimming Required~Temporarily Remove Fascia For Installation
CURT 13136 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Audi Q5; Porsche Macan
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 45 Minutes
- WC Tongue Weight: 750
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Audi Q5 and Porsche Macan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2011 - Audi Q5	L	1984	Rear	4 Cyl 2.0L	Premium Plus	121

8 In Stock

$349.38 CAD

$419.26 CAD

Brand	CURT
Part #	13136
Condition	New
Warehouse	C

2011 Audi A6 Trailer Wire Converter CURT

4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Req. Powered Converter Wiring Kit PN[55152] or Similar
CURT 56236 Multi-Function Splice-in Tail Light Converter; 4-Pin Wiring Harness
Multi-Function Taillight Converter
Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microcontroller that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55152 is also required for installation.

Additional Fitment Information:

Vehicle
2011 - Audi A6

22 In Stock

$88.66 CAD

$106.39 CAD

Brand	CURT
Part #	56236
Condition	New
Warehouse	C

2011 Audi Q7 Trailer Wiring Adapter Connector CURT

7-Way RV Blade LED Electrical Adapter (Not a Wiring Extension)
CURT 57003 LED-Compatible 7-Way RV Blade Vehicle-Side Trailer Wiring Adapter
7-Way LED Trailer Light Adapter
Product Attributes:
- WARNING CA Proposition 65: Yes
Features:
- Enables 7-Way Rave Blade Socket To Recognize Led Trailer Lights
- Integrated Resistor For Computers That Dont Recognize Led Lights
- 7-Way Connects Tail Brake Reverse Turn Signals Brakes
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
There are several different types of connectors used to supply power from a tow vehicles electrical system to a trailers wiring system. Some trailers only need the bare essentials -- running lights, brake lights and turn signals -- while others require a connection for reverse lights, electric brakes and auxiliary power. With connectors ranging from simple to complex, it may be the case that the connection between your vehicle and your trailer is not a perfect match. For example, your truck may be equipped with a 6-way round socket, but your trailer may have a 4-way flat plug. For this very common problem, CURT offers a quick and simple solution in the form of an electrical adapter. An adapter is an electrical device that allows a connection to be made between a mismatched trailer plug and vehicle socket. It easily plugs in your vehicles electrical socket and usually requires no additional wiring. CURT offers an array of adapters to accommodate most types of plugs and sockets, including 4-way flat, 4-way round, 5-way flat, 6-way round, 7-way RV blades and more. This special trailer light adapter is designed to plug into an existing 7-way RV blade socket to allow the vehicle to recognize LED trailer lights. It features built-in resistors for vehicles with computers that dont recognize LED lights and enables them to be compatible with trailers that have them. It is not intended to be used as a wiring extension. This 7-way RV blade adapter requires no splicing and is a custom wiring option for certain years of the Porsche Cayenne, Audi Q7 Quattro or Volkswagen Touareg or VW Colorado (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). All CURT wiring and electrical products come with a one-year limited warranty to give you the assurance you need to tow with confidence.

Additional Fitment Information:

Vehicle
2011 - Audi Q7

7 In Stock

$43.62 CAD

$52.34 CAD

Brand	CURT
Part #	57003
Condition	New
Warehouse	C

2011 Audi Q7 Trailer Brake Control Harness CURT

Trailer Brake Controller Harness; Select Audi Q5; SQ5; Q7; VW Atlas; Touareg
Includes OEM Connector; 2 ft. Wire; Protective Sleeve; 12 Ga. Wire; w/Quick Plug
CURT 51522 Quick Plug Brake Controller Wiring Harness; Compatible with Select Audi Q5; SQ5; Q7; Volkswagen Atlas; Touareg
Brake Control Adapter Harness
Product Attributes:
- WARNING CA Proposition 65: Yes
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 in. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Audi Q5, SQ5 and Q7 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Additional Fitment Information:

Vehicle	Sub Model
2011 - Audi Q7	TDI Premium Plus

3 In Stock

$38.16 CAD

$45.79 CAD

Brand	CURT
Part #	51522
Condition	New
Warehouse	C

2011 Audi A4 Trailer Hitch - Rear 4 Cyl 2.0L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Audi A4; Quattro
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Fascia Trimming Required~Install Time 25 Minutes
CURT 11186 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Audi A4; Quattro
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Audi A4 and A4 Quattro (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Audi A4	L	1984	Rear	4 Cyl 2.0L	121

Brand	CURT
Part #	11186
Condition	New
Warehouse	C

2011 Audi A6 Quattro Trailer Hitch - Rear 8 Cyl 4.2L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Audi A6; A6 Quattro
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
CURT 11344 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Audi A6; A6 Quattro
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Audi A6 and A6 Quattro (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Audi A6 Quattro	V	4163	Rear	8 Cyl 4.2L	-

Brand	CURT
Part #	11344
Condition	New
Warehouse	C

2011 Audi A3 Trailer Hitch - Rear 4 Cyl 2.0L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Audi A3
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Concealed~Fascia Trimming Required~Install Time 120 Minutes~Temporary Bumper Removal For Installation Required
CURT 11192 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Audi A3
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 120 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Audi A3 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Audi A3	L	1968	Rear	4 Cyl 2.0L	120

Brand	CURT
Part #	11192
Condition	New
Warehouse	C

2011 Audi A4 Quattro Trailer Hitch - Rear 4 Cyl 2.0L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Audi A4 Quattro; Allroad
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
CURT 11195 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Audi A4 Quattro; Allroad
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Audi A4 Quattro and Allroad (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.