2014 Toyota MaxTrac Parts

Choose a Model for your 2014 Toyota


Showing 1 - 10 of 84 products
Image
SKU
Product
Rating
Price

MaxTrac
  • 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
  • Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
  • Lift Blocks
  • Product Attributes:
    • Lift/Drop Height: 3 In.
  • Features:
    • Made In The USA
    • Fabricated Steel Blocks
    • Powder Coated For A Long Life
    • Angled For Pinion Correction
  • Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey

Additional Fitment Information:
Vehicle
2014 - Toyota Tundra

MaxTrac
  • 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware
  • Axle Spindle; 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware;
  • Axle Spindle
  • Features:
    • Ductile Iron Construction
    • Trimming May Be Required For Optimal Fender Well Clearance
    • Will Clear 33 in. Tire
  • Axle Spindle; 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware

Additional Fitment Information:
Vehicle Sub Model
2014 - Toyota Tacoma Pre Runner

MaxTrac
  • 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks
  • Suspension Lift Kit w/Shocks; 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 4 In.
  • Features:
    • 100 Percent Bolt On Installation
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 33 in. Tire
    • 17 in. Wheel Or Larger With 4.75 in. Backspacing Or Less
    • Track Width Increases Plus .75 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 4-inch lift for the Toyota Tacoma platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2014 - Toyota Tacoma V 3956 6 Cyl 4.0L Pre Runner 241

MaxTrac
  • 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks
  • Lift Kit-Suspension Component; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks;
  • Lift Kit-Suspension Component
  • Product Attributes:
    • Lift/Drop Height: 2 In.
  • Features:
    • Provide Additional Clearance For Your Vehicle
    • Allowing A Larger Tire Size
  • Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Maxtrac Shocks

Additional Fitment Information:
Vehicle Sub Model
2014 - Toyota Tacoma Pre Runner

MaxTrac
  • 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks 6 Lug Wheel
  • Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 6 In.
  • Features:
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 35 in. Tire
    • Track Width Increases Plus .75 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2014 - Toyota Tacoma V 3956 6 Cyl 4.0L Base RWD 241

MaxTrac
  • 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks 6 Lug Wheel
  • Lift Kit-Suspension Component; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks;
  • Lift Kit-Suspension Component
  • Product Attributes:
    • Lift/Drop Height: 2 In.
  • Features:
    • 100 Percent Bolt On Installation
    • Ductile Iron Construction
    • Increased Ground Clearance
  • Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Includes Lift Blocks; U-Bolts; Fox Rear Shocks

Additional Fitment Information:
Vehicle Sub Model Drive Type
2014 - Toyota Tacoma Base RWD

MaxTrac
  • 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks
  • Suspension Lift Kit w/Shocks; 3.5 in. Lift; Includes Spindles w/Brake Lines/Rear Blocks/U-Bolts/Rear Maxtrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 3.5 In.
  • Features:
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 33 in. Tire
    • 18 in. Wheel Or Larger With 6.5 in. Backspacing Or Less
    • Track Width Increases 1 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 3.5-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2014 - Toyota Tundra V 5663 8 Cyl 5.7L SR5 RWD 345

MaxTrac
  • 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware
  • Suspension Strut Spacer Leveling Kit; 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware;
  • Suspension Strut Spacer Leveling Kit
  • Product Attributes:
    • Lift/Drop Height: 2.5 In.
  • Features:
    • Made In The USA
    • Made From 1/4 in. Steel
    • Will Clear 32 in. Tire
    • Extremely High Quality Fabricated Strut Spacer
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • Suspension Strut Spacer Leveling Kit; 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2014 - Toyota 4Runner Front SR5 4WD

MaxTrac
  • 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware 6 Lug Wheel
  • Suspension Strut Spacer Leveling Kit; 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware;
  • Suspension Strut Spacer Leveling Kit
  • Product Attributes:
    • Lift/Drop Height: 2.5 In.
  • Features:
    • Made In The USA
    • Made From 1/4 in. Steel
    • Will Clear 32 in. Tire
    • Extremely High Quality Fabricated Strut Spacer
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • Suspension Strut Spacer Leveling Kit; 2.5 in.; Powder Coated Grey; Includes 2 Strut Spacers And All Necessary Hardware

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2014 - Toyota Tacoma Front Base 4WD

MaxTrac
  • Subframes; Rear Shocks; Box Two Of Three
  • Lift Kit-Suspension Component; Subframes; Rear Shocks; Box Two Of Three;
  • Lift Kit-Suspension Component
  • Product Attributes:
    • Lift/Drop Height: 6 In.
  • Features:
    • Suspension Component Box
  • Suspension Component Box

Additional Fitment Information:
Vehicle Sub Model Drive Type
2014 - Toyota Tundra Platinum 4WD
Showing 1 - 10 of 84 products

Loading...