1986 Jeep Yukon Gear Parts

Choose a Model for your 1986 Jeep

CJ7 Cherokee Comanche Grand Wagoneer J10 J20 Scrambler Wagoneer

Showing 1 - 10 of 51 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1986 Jeep Cherokee Drive Axle Shaft Assembly - Front Yukon Gear

Yukon Chromoly Front Axle Kit; Dana 30; Both Sides; 27 Spline; 1310 U-Joints
4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints Dana 30 Front Axle Kit; 4340 Chrome-Moly Shafts; 27 Spline Inner and Outer Axles; Spicer U-Joints; and Disconnect Block Off Kit with Axle Seals~Dana 30; Reverse Rotation; 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
Axle Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Jeep Wrangler And Cherokee Front w/Dana Spicer 30
- Front Axle Kit
- 4340 Chromoly Axles
- 27 Spline Inner Axles
- Includes Inner And Outer Axle Shafts w/Spicer U-Joints
Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.

This Part Fits the Following OEM/Substitute Numbers:

ZA W24110

Additional Fitment Information:

Vehicle	Position	Drive Type
1986 - Jeep Cherokee	Front	4WD

5 In Stock

$1,445.14 CAD

$1,734.17 CAD

Brand	Yukon Gear
Part #	Y11YA W24110
Condition	New
Warehouse	B

1986 Jeep Wagoneer Differential - Front 4 Cyl 2.5L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1986 - Jeep Wagoneer	L	-	Front	4 Cyl 2.5L	150

2 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Jeep Comanche Differential - Rear 6 Cyl 2.8L Yukon Gear

Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Dura Grip Positraction
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Jeep Comanche	V	-	Rear	6 Cyl 2.8L	4WD	173

2 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGD44-3-30-1
Condition	New
Warehouse	B

1986 Jeep Wagoneer Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
AMC 20; Timken Brand; Some Flanged AMC Model 20; Timken Brand; Some Flanged~Dana 44; Timken Brand; Some Flanged
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:

Vehicle	Position
1986 - Jeep Wagoneer	Rear

Brand	Yukon Gear
Part #	Y11AK SET10
Condition	New
Warehouse	B

1986 Jeep Grand Wagoneer Differential Carrier - Front 6 Cyl 4.2L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1986 - Jeep Grand Wagoneer	L	-	Front	6 Cyl 4.2L	258

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1986 Jeep Comanche Differential Carrier - Rear 6 Cyl 2.8L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Reverse Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1986 - Jeep Comanche	V	-	Rear	6 Cyl 2.8L	4WD	173

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1986 Jeep CJ7 Differential Carrier - Rear 4 Cyl 2.5L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1986 - Jeep CJ7	L	-	Rear	4 Cyl 2.5L	150

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

1986 Jeep Comanche Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
AMC 20; Timken Brand; Some Flanged Dana 44; Timken Brand; Some Flanged
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:

Vehicle	Position	Drive Type
1986 - Jeep Comanche	Rear	4WD

Brand	Yukon Gear
Part #	Y11AK SET10
Condition	New
Warehouse	B

1986 Jeep Comanche Spider Gear Yukon Gear

Yukon standard open spider gear kit for Model 35 with 27 spline axles
Dana 35; 27 Spline; 1.560 in. Side Gear Bore AMC Model 35; Dana 35; 27 Spline; 1.560 in. Side Gear Bore~Model 35; Dana 35; Standard Open Spider Gear Kit; 27 Spline; 1.560 in. Side Gear Journal
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits AMC Model 35 Open Differential w/1.560 in. Side Gear Bore
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

This Part Fits the Following OEM/Substitute Numbers:

ZIKM35-S-27-1.5

Additional Fitment Information:

Vehicle	Drive Type
1986 - Jeep Comanche	4WD

Brand	Yukon Gear
Part #	Y11YPKM35-S-27-1.5
Condition	New
Warehouse	B

1986 Jeep J10 Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
AMC 20; Timken Brand; Some Flanged AMC Model 20; Timken Brand; Some Flanged
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.