2010 Chevrolet Yukon Gear Parts

Choose a Model for your 2010 Chevrolet

Avalanche Camaro Colorado Corvette Express 1500 Express 2500 Express 3500 Silverado 1500 Silverado 2500 HD Silverado 3500 HD Suburban 1500 Suburban 2500 Tahoe

Showing 1 - 10 of 42 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2010 Chevrolet Tahoe Spider Gear Yukon Gear

10 Bolt open spider gear set for 00-06 8.6in. GM with 30 spline axles
8.6 in. Axle; 30 Spline GM 8.6 in.; 30 Spline~GM 8.6 in.; 30 Spline; Rear; Spider Gear Set; Fits 00-06 Case with Casting #s 1073 or 7875
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits 2000-2006 GM 8.6 in. Open Differential
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Additional Fitment Information:

Vehicle	Drive Type
2010 - Chevrolet Tahoe	4WD

2 In Stock

$238.40 CAD

$286.08 CAD

Brand	Yukon Gear
Part #	Y11YPKGM8.6-S-30V2
Condition	New
Warehouse	B

2010 Chevrolet Silverado 1500 Differential Side Bearing Spacer Yukon Gear

Yukon Positraction Shim kit GM 8.2in.; GM 8.5in.; 12T; 12P; 8.8in./Cast Iron Vet
8.875 in. 12 Bolt; 8.8 in. 10 Bolt GM 8.6 in.; Dura Grip Posi Shim Kit
Yukon Positraction shim kit (12 shims) for GM 8.2in.; GM 8.5in./8.6in.; 12T; 12P; Ford 8.8in./Cast Iron Vette
Positraction Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Ford 8.8 in.
- 1963-1979 Corvette
- GM 12 Bolt Passenger Car/Truck
- 8.2 in./8.5 in./8.6 in. Dura Grip Positraction
- Shim Kit
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.

Additional Fitment Information:

Vehicle	Sub Model	Drive Type
2010 - Chevrolet Silverado 1500	Hybrid	RWD

2 In Stock

$45.21 CAD

$54.25 CAD

Brand	Yukon Gear
Part #	Y11YPKGM12-PC-SHIM
Condition	New
Warehouse	B

2010 Chevrolet Avalanche Differential - Front 8 Cyl 5.3L Yukon Gear

8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
Yukon Dura Grip Differential
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2010 - Chevrolet Avalanche	V	5328	Front	8 Cyl 5.3L	325

1 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGGM8.5-3-30-1
Condition	New
Warehouse	B

2010 Chevrolet Colorado Differential - Rear 5 Cyl 3.7L Yukon Gear

8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
Yukon Dura Grip Differential
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2010 - Chevrolet Colorado	L	3654	Rear	5 Cyl 3.7L	223

1 In Stock

$960.51 CAD

$1,152.61 CAD

Brand	Yukon Gear
Part #	Y11YDGGM8.5-3-30-1
Condition	New
Warehouse	B

2010 Chevrolet Silverado 2500 HD Differential Rebuild Kit 8 Cyl 6.6L Yukon Gear

Yukon Master Overhaul kit for 2010/down GM/Dodge 11.5in. differential
11.5 in. 11.5 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; 4.125 in. OD Pinion Bearing Race (HM807010)~GM 11.5 in.
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Gm 11.5 In.
Features:
- Fits 2010 And Down GM And Chrysler 11.5 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Are Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Pinion Nut
- Thread Locker
- Marking Compound w/Brush And Silicone
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

This Part Fits the Following OEM/Substitute Numbers:

ZK GM11.5

Additional Fitment Information:

Vehicle	Block	CC	Engine	Drive Type	CID
2010 - Chevrolet Silverado 2500 HD	V	6599	8 Cyl 6.6L	4WD	403

3 In Stock

$899.57 CAD

$1,079.48 CAD

Brand	Yukon Gear
Part #	Y11YK GM11.5
Condition	New
Warehouse	B

2010 Chevrolet Silverado 2500 HD Differential Ring and Pinion - Rear 8 Cyl 6.0L Yukon Gear

High performance Yukon Ring/Pinion gear set for GM/Chy 11.5in. Rear in a 3.73
11.5 in.; 3.73 Ratio 11.5 in. Rear; Ring and Pinion Set; 3.73 Ratio~GM 11.5 in.; 3.73 Ratio
Yukon engineers use state-of-the-art design; advanced heat-treating techniques; and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting specifications and quality standards.
Ring And Pinion Gear Set
Product Attributes:
- Axle Type: Gm 11.5 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
Features:
- Fits GM And Chrysler 11.5 in.
- 30 Spline Pinion
- 3.73 Ratio
- 12 Ring Gear Bolts
- 11.50 in. Ring Gear Diameter
Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.

This Part Fits the Following OEM/Substitute Numbers:

ZG GM11.5-373

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
2010 - Chevrolet Silverado 2500 HD	V	5967	Rear	8 Cyl 6.0L	4WD	364

1 In Stock

$1,113.00 CAD

$1,335.60 CAD

Brand	Yukon Gear
Part #	Y11YG GM11.5-373
Condition	New
Warehouse	B

2010 Chevrolet Silverado 3500 HD Differential Cover - Rear Yukon Gear

Steel cover for Chrysler/GM 11.5in.; w/o fill plug
11.5 in.; w/o Fill Plug; Steel GM 11.5 in.; w/o Fill Plug; Steel
Steel cover for Chrysler/GM 11.5in.; w/o fill plug
Differential Cover
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits GM And Chrysler 11.5 in.
- Steel
These Yukon replacement diff covers are a direct bolt-on.

Additional Fitment Information:

Vehicle	Position	Drive Type
2010 - Chevrolet Silverado 3500 HD	Rear	RWD

1 In Stock

$176.00 CAD

$211.20 CAD

Brand	Yukon Gear
Part #	Y11YP C5-GM11.5
Condition	New
Warehouse	B

2010 Chevrolet Colorado Differential Side Bearing Spacer Yukon Gear

Super Carrier Shim kit for Ford 7.5in.; GM 7.5in.; 8.2in./8.5
7.625 in./8.2 in. 10 Bolt; 7.6 in. ; Carrier shim kit; Interlocking design~GM 7.6IFS
Super Carrier Shim kit for Ford 7.5in.; GM 7.5in.; 8.2in./8.5in.
Super Carrier Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Super Carrier Shim Kit For Ford 7.5 in./GM 7.5 in./7.625 in./7.6 in. IFS
- 7.6 in. IRS/7.75 in./8.2 in./8.2 in. Buick
- Oldsmobile And Pontiac And GM 8.5 in. Front And Rear
- Interlocking Design Makes Installation Much Easier
Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.

Additional Fitment Information:

Vehicle	Drive Type
2010 - Chevrolet Colorado	4WD

Brand	Yukon Gear
Part #	Y11SK SS10
Condition	New
Warehouse	B

2010 Chevrolet Avalanche Differential Carrier - Front 8 Cyl 5.3L Yukon Gear

Yukon 30 spline standard open loaded carrier case; GM 8.6
8.6 in. 10 Bolt; Standard; Loaded; Early Design GM 8.6 in.; 10 Bolt; Standard Open Carrier Case; Loaded with Spider Gears~GM 8.6 in.; Standard; Loaded; Early Design
GM 8.6in. 30 spline standard open loaded carrier. Complete differential case with internals.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits GM 8.6 in.
- Standard Open Carrier Case And Spiders
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
2010 - Chevrolet Avalanche	V	5328	Front	8 Cyl 5.3L	4WD	325

Brand	Yukon Gear
Part #	YC G40048044
Condition	New

2010 Chevrolet Colorado Differential Carrier - Rear 4 Cyl 2.9L Yukon Gear

Yukon 30 spline standard open loaded carrier case; GM 8.6
8.6 in. 10 Bolt; Standard; Loaded; Early Design GM 8.6 in.; 10 Bolt; Standard Open Carrier Case; Loaded with Spider Gears~GM 8.6 in.; Standard; Loaded; Early Design
GM 8.6in. 30 spline standard open loaded carrier. Complete differential case with internals.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits GM 8.6 in.
- Standard Open Carrier Case And Spiders
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.