2013 Jeep Yukon Gear Parts

Choose a Model for your 2013 Jeep

Grand Cherokee Wrangler

Showing 1 - 10 of 102 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2013 Jeep Wrangler Differential Carrier - Front 6 Cyl 3.6L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	Front	6 Cyl 3.6L	Unlimited Sahara	220

1 In Stock

$178.33 CAD

$214.00 CAD

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Carrier - Rear 6 Cyl 3.6L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	Rear	6 Cyl 3.6L	Sport	220

1 In Stock

$178.33 CAD

$214.00 CAD

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Carrier - Front 6 Cyl 3.6L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2013 - Jeep Wrangler	V	3604	Front	6 Cyl 3.6L	220

1 In Stock

$203.46 CAD

$244.15 CAD

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Carrier - Rear 6 Cyl 3.6L Yukon Gear

Yukon replacement standard open carrier case for Dana 30; 3.73/up
Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
Carrier Case
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 30
- Does Not Include Spider Gears
- 3.73 And Up Ratio Only
- Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2013 - Jeep Wrangler	V	3604	Rear	6 Cyl 3.6L	220

1 In Stock

$203.46 CAD

$244.15 CAD

Brand	Yukon Gear
Part #	Y11YC D706008
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Carrier - Front 6 Cyl 3.6L Yukon Gear

Yukon Replacement Front standard Open Carrier Case for Jeep JK D30
D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios
Yukon replacement standard open carrier case for Dana 30 JK front; 3.73/up
Differential Carrier Cases
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Jeep JK
- Dana 30
- 3.73 And Up
- Front
- Replacement Front Standard Open Carrier Case
Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	Front	6 Cyl 3.6L	Sport	220

1 In Stock

$223.10 CAD

$267.72 CAD

Brand	Yukon Gear
Part #	Y11YC D2010999
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.6L Yukon Gear

Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
Dana; For Use w/Reverse Rotation Diff Dana 30~Dana 30 JK Front; Differential Rebuild Kit; Timken Bearings; Includes Inner Axle Seals
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
  - Dana 30 Reverse
  - Dana 30 Standard
Features:
- Fits Dana Spicer 30 JK
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Axle Seals
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	6 Cyl 3.6L	Sahara	220

13 In Stock

$541.72 CAD

$650.06 CAD

Brand	Yukon Gear
Part #	Y11YK D30-JK
Condition	New
Warehouse	B

2013 Jeep Wrangler Drive Axle Shaft - Rear Right Yukon Gear

Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
Axle Shaft
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
Features:
- Fits Dana 44 Differential
- For Right-Hand Side
- Measures 32.6 in
- 32 Spline
- 5 X 5.0 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Bearing And Seal
- ABS Ring
- Retainer
- And Studs
Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Jeep Wrangler	Rear Right	Unlimited Rubicon

2 In Stock

$577.57 CAD

$693.08 CAD

Brand	Yukon Gear
Part #	Y11YA WD44JKRUB-R-K
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.6L Yukon Gear

Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.88 ratio.
Dana 44; Dana 35; 4.88 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 4.88 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit
Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
Yukon Gear And Install Kit
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  - Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model:
  - Dana 35 Standard
  - Dana 44
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 4.88 Ratio
Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:

ZGK015

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2013 - Jeep Wrangler	V	3604	6 Cyl 3.6L	Rubicon	220

1 In Stock

$1,937.90 CAD

$2,325.48 CAD

Brand	Yukon Gear
Part #	Y11YGK015
Condition	New
Warehouse	B

2013 Jeep Wrangler Drive Axle Shaft - Rear Right Yukon Gear

Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; JK Rubicon; 32.6 in. Long
Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
Axle Shaft
Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
Features:
- Fits Dana 44 Differential
- For Right-Hand Side
- Measures 32.6 in
- 32 Spline
- 5 X 5.0 in. Bolt Pattern
- Heavy Duty 4340 Chromoly Construction
- Includes Axle Bearing And Seal
- ABS Ring
- Retainer
- And Studs
Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Additional Fitment Information:

Vehicle	Position	Sub Model
2013 - Jeep Wrangler	Rear Right	Rubicon

2 In Stock

$577.57 CAD

$693.08 CAD

Brand	Yukon Gear
Part #	Y11YA WD44JKRUB-R-K
Condition	New
Warehouse	B

2013 Jeep Wrangler Differential Rebuild Kit 6 Cyl 3.6L Yukon Gear

Yukon Master kit for Dana 44 rear diff for use with new 07+non-JK Rubicon.
Dana 44; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts Dana 44; Non-Rubicon JK; Pin Seal; Crush Sleeve; Pinion Depth Shims; Carrier Shims; Marking Compound; PinNut; ORing; Slinger; Gasket; Ring Gear Bolts
Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Yukon Differential Master Overhaul Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Dana 44 Standard 30 Spline
Features:
- Fits Dana Spicer 44 JK Non-Rubicon Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Crush Sleeve
- Includes Ring Gear Bolts
- Pinion Nut
- Oil Baffles/Slingers
- Thread Locker
- Marking Compound w/Brush And Gasket
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.