1967 Jaguar Air and Fuel Delivery Parts

Choose a Model for your 1967 Jaguar


Showing 1 - 10 of 10 products
Image
SKU
Product
Rating
Price

Motorad
  • Locking Fuel Cap
  • Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: Yes
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10491, 11491, 12F36L, 31691, 40091, 5091, 703-1837, 9MGC91, G91, MGC91, MGC91SK, P5091

Additional Fitment Information:
Vehicle Block CC Engine CID
1967 - Jaguar XKE L 4235 6 Cyl 4.2L -

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1967 - Jaguar 3.4

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1967 - Jaguar 3.4

Royze
Additional Fitment Information:
Vehicle
1967 - Jaguar 420

Royze
  • 4.2 Liter Engine 175CD Carb.

Additional Fitment Information:
Vehicle
1967 - Jaguar XKE

Original Equipment
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with SU HD8 Carburetor

Additional Fitment Information:
Vehicle
1967 - Jaguar XKE

Mann-Filter
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 3 SU Carbs

Additional Fitment Information:
Vehicle
1967 - Jaguar XKE

Royze
  • 1.25 with SU HD8 Carbs
  • 1.25

Additional Fitment Information:
Vehicle
1967 - Jaguar 420

Royze
  • 1.25 - with SU HD8 Carburetors
  • 1.25

Additional Fitment Information:
Vehicle
1967 - Jaguar XKE

Febi
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • with 175CD Carb. 4.2 Liter Engine

Additional Fitment Information:
Vehicle
1967 - Jaguar XKE
Showing 1 - 10 of 10 products

Loading...