2023 Belts and Cooling Parts

Choose a Make for your 2023 vehicle

Acura Audi BMW Ford Hyundai INFINITI Jaguar Jeep Land Rover Lexus Lincoln Mercedes-Benz Mini Nissan Ram Subaru Toyota Volkswagen

Showing 1 - 10 of 274 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2023 Lincoln Navigator Intercooler Kit 6 Cyl 3.5L Mishimoto

2015+ Ford F-150 EcoBoost Intercooler
Intercooler, fits Ford F-150 EcoBoost 2015+
Product Attributes:
- SellingPoint04: 163-percent Increase In External Fin Surface Area
- TechSpec Pipe Shape: N/a
- SellingPoint05: Cnc-machined Inlets And Outlets Are Ridged For Greater Holding Power
- SellingPoint06: All-aluminum, Tig-welded Construction
- SellingPoint07: Internal Fin Design For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint01: Direct Fit For The 2015+ Ford F-150 Ecoboost
- SellingPoint02: 10f (5.5c) Reduction In Intake Air Temp
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 29
- SellingPoint03: 77-percent Increase In Internal Core Volume
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Fits With Stock And Mishimoto 2.7l And 3.5l Intercooler Pipe Kits
- SellingPoint09: Fits With Stock Intercooler Fans Without Modification
- CARB EO Number: D-759-6
- TechSpec Core Type: Bar-and-plate
- TechSpec Core Height (in): 9.4
- TechSpec Maximum Recommended Boost Pressure (PSI): 50
- TechSpec Core Thickness (in): 4.72
- TechSpec Pipe Diameter: N/a
- OptionLabel: Sleek Silver
- SellingPoint10: Available In Sleek Silver Or Stealth Black
- TechSpec Note: N/a
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.7l V6 Ecoboost--3.5l V6 Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 19.6
- TechSpec Overall Height (in): 9.5
- TechSpec Applications: 2015+ Ford F-150 Ecoboost--2017+ Ford Raptor 3.5l V6 Ecoboost--2018+ Ford Expedition 3.5l V6 Ecoboost--2018+ Lincoln Navigator 3.5l V6 Ecoboost
- TechSpec Includes: (1) Mishimoto Intercooler W/ Assembled Rubber Trim--(1) Bypass Valve Bracket--mounting Hardware--bypass Valve Hardware--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 2.5
- TechSpec Overall Width (in): 7
- TechSpec Outlet (in): 3
Features:
- 77-percent increase in internal core volume
- 163-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Direct fit for the 2015+ Ford F-150 EcoBoost
- 10 F (5.5 C) reduction in intake air temp
Keep those air intake temps down! With Mishimoto's Performance Intercooler for the 2015+ Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77-percent over stock and external fin surface area by 163-percent. We put our core through some grueling tests to see how our design can alleviate the effects of heat soak. With temperature drops averaging 10 degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2023 - Lincoln Navigator	V	3496	6 Cyl 3.5L	Black Label	213

1 In Stock

$1,596.47 CAD

$1,915.76 CAD

Brand	Mishimoto
Part #	M1NMMINT-F150-15SL
Condition	New
Warehouse	B

UPC: 748354032574

2023 Ford Ranger Engine Coolant Reservoir 4 Cyl 2.3L Mishimoto

Aluminum Expansion Tank, Fits 2019+ Ford Ranger, Natural
Aluminum Expansion Tank, Fits 2019+ Ford Ranger 2.3L EcoBoost, Natural
Product Attributes:
- SellingPoint04: Internal Baffles Keep Coolant Near Overflow Port During Aggressive Driving, Preventing Air Entry Into Coolant System
- SellingPoint05: Fill Neck Accepts Stock Cap For Easy Maintenance
- SellingPoint06: Available In Polished Or Micro-wrinkle Black Powder Coated Finish To Suit Any Style
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For 2019+ Ford Ranger 2.3l Ecoboost
- SellingPoint02: Full-aluminum Construction With Durable Precision Tig-welds
- SellingPoint03: High-visibility Sight Glass And Stamped Cold-fill Line Allow For Quick Reading Of Coolant Level
- TechSpec Chassis Codes: T6
- SellingPoint08: N/a
- SellingPoint09: N/a
- OptionLabel: Polished
- SellingPoint10: N/a
- TechSpec Note: After A Few Heating And Cooling Cycles, Mishimoto Recommends Checking The Sight Tube On The Side Of The Expansion Tank To Confirm Proper Coolant Level.
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 2.3l Ecoboost
- SellingPoint13: N/a
- TechSpec Height (in): 9.72
- SellingPoint14: N/a
- TechSpec Material: Aluminum
- TechSpec Applications: Ford Ranger I4 2.3l 2019+
- TechSpec Includes: (1)aluminum Coolant Tank W/ Sight Glass--(1) Drain Hose--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Width (in): 9.35
- TechSpec Fluid Capacity (gal): 1.03
It's only been four years since the first Ford Ranger 2.3L EcoBoost rolled off the assembly line, but those four years have been rough on some of the plastic parts under your Ranger's hood. Your coolant expansion tank is probably beginning to show its age thanks to thousands of heating and cooling cycles bathed in orange or pink coolant. It's likely developed that classic dingy yellow tone, and it may be hard to see the coolant level through the side of the tank that gets more opaque by the day. Soon enough, that plastic expansion tank will become brittle, and one misplaced elbow or especially deep pothole has the potential to start a cascade of coolant. Luckily, Mishimoto's 2019+ Ford Ranger all-aluminum expansion tank is built to last a lifetime.----Our Ford Ranger EcoBoost expansion tank is constructed from aircraft-grade aluminum and precision TIG-welded to create a durable expansion tank that can withstand thousands of heat cycles and high pressures without cracks or leaks. On the outside, we've included a high-visibility sight glass and stamped cold-fill line to make checking your coolant level easy, while the available micro-wrinkle black powder coated or polished finishes suit any style. Our fill neck also accepts the stock expansion tank cap to keep maintenance easy. Inside, baffles keep coolant cycling into the engine, no matter how steep the road or trail gets.----Like all of our products, this aluminum expansion tank for your 2019+ Ford Ranger 2.3L EcoBoost is backed by our Mishimoto Lifetime Warranty for a lifetime of durability and worry-free running.

This Part Fits the Following OEM/Substitute Numbers:

EB3Z8A080D

Additional Fitment Information:

Vehicle	Block	CC	Engine	Aspiration	CID
2023 - Ford Ranger	L	2300	4 Cyl 2.3L	Turbocharged	140

6 In Stock

$489.06 CAD

$586.87 CAD

Brand	Mishimoto
Part #	M1NMMRT-RGR-19P
Condition	New
Warehouse	B

UPC: 840197712825

2023 Jeep Wrangler Radiator 6 Cyl 3.6L Mishimoto

Performance Aluminum Radiator, fits Jeep Wrangler JL 2018+
Performance Aluminum Radiator, fits Jeep Wrangler JL 2018+
Product Attributes:
- SellingPoint04: 37 Percent Greater Fin Surface Area For Improved Heat Transfer In Cramped Cooling Stack
- SellingPoint05: Strutted Tubes Reinforce Core Against Chassis Flex And Vibration
- SellingPoint06: Tig-welded Aluminum End Tanks Withstand Rough Trails Without Cracking
- SellingPoint07: Oversized Single-row Design Utilizes Full Core Depth
- SellingPoint01: Direct Fit For 2018+ Jeep Wrangler Jl
- SellingPoint02: 51 Percent Increase In Core Volume For Improved Cooling Efficiency
- TechSpec Overall Length (in): 28.75
- SellingPoint03: 38 Percent Larger Coolant Capacity Withstands Greater Cooling Loads
- TechSpec Chassis Codes: Jl--jt
- SellingPoint08: Removable Outlet Port For Easy Installation
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 19.53
- TechSpec Core Thickness (in): 1.57
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 3.6l Pentastar--3.0l Ecodiesel--2.0l Hurricane
- TechSpec Overall Width (ins): 6.32
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 22.91
- TechSpec Overall Height (in): 20.12
- TechSpec Material: 6061-aluminum
- TechSpec Applications: Jeep Wrangler I4 2.0l Turbo 2018+ --jeep Wrangler V6 3.6l 2018+--jeep Wrangler V6 3.0l Turbo 2018+--jeep Gladiator V6 3.6l 2018+--jeep Gladiator V6 3.0l Turbo 2018+
- TechSpec Includes: (1) Aluminum Radiator--(1) Coolant Outlet--(1) Coolant Outlet O-ring--(1) M12 X 1.5 Drain Plug--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 1
- TechSpec DPI: 2957
- TechSpec Fluid Capacity (gal): 0.563
- TechSpec Inlet (in): N/a
- TechSpec Outlet (in): N/a
but it’s not perfect.----The 2018+ Jeep Wrangler JL has one of the most cramped cooling stacks we’ve seen in a modern vehicle, especially in the 2.0L spec with the additional heat exchanger for the turbo system. That cramped cooling stack means the JL needs an efficient radiator, and the stock radiator often falls short. Luckily, Mishimoto has developed a performance radiator that makes the most of the cramped space in the front of the JL.----This Mishimoto performance radiator for the 2018+ Jeep Wrangler JL is designed to make the most of every inch of the Wrangler’s cooling stack while withstanding the rigors of off-road (and everyday) life. Our radiator features an oversized core that’s 51 percent larger than stock, with a 38 percent greater coolant capacity to effectively cool your engine, even at low speeds. The 37 percent increase in fin surface area and oversized single-row design means that every square inch of core is used to transfer heat away from your engine.----Wranglers are known for their durability and our radiator is built to match. The full-aluminum, TIG-welded end tanks are designed to withstand vibration and repeated heat cycles without cracking or leaking. To add even more durability, we've constructed the core with extruded and strutted tubes that resist chassis flex on the trail. Like all our Wrangler products, this 2018+ Jeep Wrangler JL performance radiator is backed by our Mishimoto Lifetime Warranty, making it as dependable as your Jeep.

This Part Fits the Following OEM/Substitute Numbers:

68314786AC, MOJ996

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2023 - Jeep Wrangler	V	3604	6 Cyl 3.6L	Sport	220

4 In Stock

$1,132.75 CAD

$1,359.30 CAD

Brand	Mishimoto
Part #	M1NMMRAD-JL-18
Condition	New
Warehouse	B

UPC: 840197718377

2023 BMW M440i xDrive Automatic Transmission Oil Cooler 6 Cyl 3.0L CSF

A90 Supra / BMW G-Series Transmission Cooler
CSF offers the best and most advanced Transmission Coolers on the market. Keeping your transmission temps down as you push your Supra / BMW hard on the street or track.
Product Attributes:
- Core Material: Aluminum
- Title: A90 Supra / Bmw G-series Transmission Cooler
Features:
- Innovative Dual-Core Design (Industry Exclusive) vs. OEM Single Core - 240% Increase in Core Volume - 130% Increase in Fluid Capacity Compared to OEM (CSF 550ml vs. OEM 240ml)
- Ideal for Road Racing, Drag Racing, and Vehicles With Increased Performance and/or Transmission Tuning
- 5.4mm Tall Multi-Louvered Fin vs. OEM 7mm - Two 16mm Stacked Cores = 32mm Core Width (44mm Overall Width) vs. OEM 15mm Core Width - Rear Cooler: 15 Rows vs. OEM 12 Rows - Front Cooler: Additional 12 Rows
- Made with CSF's AC Condenser Technology Using a 1-Row Super-High Pressure 16mm 9-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact
- 129mm Overall Height vs. OEM 125mm Allows for Maximum Performance Without Increasing Overall Surface Area or Blocking Airflow to Rest of Cooling System
- Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow
- OEM Style "Quick Connect" Inlet/Outlet Connections
- Drop-in Fit Requires No Modifications to Install
- Can be Installed With CSF's High-Performance Heat Exchanger (CSF #8154) or with the OEM Cooling System
- 2-Year Limited Warranty
CSF is the world leader in cooling technology. From its experience starting with the transmission in the BMW F8X M3, M4, and M2 Comp, CSF applied several different features exclusive to its manufacturing technologies. An innovative dual-core design allows for a 240% increase in core volume, resulting in maximum performance and maintaining optimal shifting during extreme racing conditions - from road racing to the drag strip. During R&D, CSF consulted with a network of partners, including leading time attack teams, tuners, and more. Often, the feedback was gearbox fatigue and sluggish shifting with transmission temperatures overheating under prolonged or hard use. CSF has the answer with our industry-leading transmission cooler for the A90/91 Supra and BMW G-Series. Installed in one of the world's fastest A90 Supra - Titan Motorsports Drag Race Supra (first Supra to reach 8s in the 1/4 mile).CSF's industry-exclusive dual-core design allows for maximum performance and the largest core volume oil capacity without affecting airflow into the rest of the cooling system. No more transmission temperature overheating or expansion tank overflow during racing conditions. Designed as a drop-in fit to work with both the OEM Front Mount Heat Exchanger as well as CSF's High-Performance version (CSF #8154) with included rock guard. Also designed to utilize the OEM top/bottom rubber seals for optimal airflow into the cooling system.

This Part Fits the Following OEM/Substitute Numbers:

17 21 9 494 828, 17-21-9-494-828, 17219494828, 32910 WAA02, 32910-WAA02, 32910WAA02

Additional Fitment Information:

Vehicle	Block	CC	Region	Engine	Manuf. Body Code	Body	Aspiration	CID
2023 - BMW M440i xDrive	L	2998	United States	6 Cyl 3.0L	G23	Convertible	Turbocharged	-

3 In Stock

$818.55 CAD

$982.26 CAD

Brand	CSF
Part #	CSF8183
Condition	New
Warehouse	B

UPC: 710353081839

2023 Jeep Grand Cherokee Engine Coolant Thermostat Housing 8 Cyl 5.7L Crown Automotive

Black
Thermostat Housing; Black;
Thermostat Housing
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Thermostat Housing
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
2023 - Jeep Grand Cherokee	V	-	8 Cyl 5.7L	Summit Reserve	345

9 In Stock

$41.28 CAD

$49.54 CAD

Brand	Crown Automotive
Part #	C1Y53021536AC
Condition	New
Warehouse	B

2023 Lexus GX460 Radiator 8 Cyl 4.6L CSF

Lexus GX460 Heavy-Duty All-Aluminum Radiator
CSF manufactures the most advanced and efficient radiator in the industry for your Lexus GX460. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
Product Attributes:
- Core Material: Aluminum
- Title: Lexus Gx460 Heavy-duty All-aluminum Radiator
Features:
- 2-Row - 42mm Ultra-High-Performance Core
- 2-Year Limited Warranty
- CSF's Exclusive B-Tube Technology
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined Mounting Brackets, Fittings, and OEM Style Inlet/Outlet
- 100% All Aluminum TIG-Welded Construction
- Built in Heavy-Duty High-Performance 5 Plate Transmission Oil Cooler in left side tank
- Smooth Satin Finish
- True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
- Individually Leak and Pressure Tested
The 2-Row 42mm aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. End tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting. CSF even includes pre-cut double sided adhesive foam strips to help seal the fan shroud against the radiator. This improves airflow efficiency off the fan. Additionally, the radiator features a built-in transmission oil cooler. The transmission cooler is a heavy-duty high-performance 5 plate design that connects to the OEM hoses. The upgraded built in cooler is great dealing with the added heat and stress from towing, low gear crawling, and vehicles equipped with oversized tires. While many understand the impacts of oversized tires, it is always good to provide extra incite. By increasing the diameter of your tires, you are reducing the effective gear ratio. This means the engine and transmission have to work harder to move the tires. Obviously this will end up generating excess heat, but the CSF radiator is designed to handle it.

This Part Fits the Following OEM/Substitute Numbers:

16400 38253, 16400 38290, 16400-38253, 16400-38290, 1640038253, 1640038290

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Region	Engine	Sub Model	Body	CID
2023 - Lexus GX460	V	4608	1UR-FE	United States	8 Cyl 4.6L	Base	Sport Utility	-

2 In Stock

$755.11 CAD

$906.13 CAD

Brand	CSF
Part #	CSF7214
Condition	New
Warehouse	B

UPC: 710353072141

2023 Subaru Crosstrek Radiator 4 Cyl 2.0L CSF

2nd Gen Crosstrek / 5th Gen Impreza High-Performance All-Aluminum Radiator
CSF manufactures the most advanced and efficient radiator in the industry for your Crosstrek/Impreza. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
Product Attributes:
- Core Material: Aluminum
- Title: 2nd Gen Crosstrek / 5th Gen Impreza High-performance All-aluminum Radiator
Features:
- 2-Row - 42mm Ultra-High-Performance Core
- Cooling Tubes with CSF's Exclusive B-Tube Technology
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined Mounting Brackets and OEM Style Inlet/Outlet
- 100% All Aluminum TIG-Welded Construction
- Smooth Satin Finish
- True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
- Individually Leak and Pressure Tested
- 2-Year Limited Warranty
The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.

This Part Fits the Following OEM/Substitute Numbers:

45111FL001, 45111FL00B

Additional Fitment Information:

Vehicle	Block	CC	Engine Designation	Region	Engine	Sub Model	Body	CID
2023 - Subaru Crosstrek	H	1995	FB20	Canada	4 Cyl 2.0L	Convenience	Wagon	-

4 In Stock

$640.90 CAD

$769.08 CAD

Brand	CSF
Part #	CSF7216
Condition	New
Warehouse	B

UPC: 710353072165

2023 Ford Bronco Intercooler Pipe K&N

K/N s charge pipe kits are engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler
Charge Pipe Kit
Product Attributes:
- Package Contents: 1 Intercooler Pipe
- WARNING CA Proposition 65: Yes
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
Features:
- Charge Pipe Kit
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N's No-Hassle Lifetime Limited Warranty.

Additional Fitment Information:

Vehicle	Sub Model
2023 - Ford Bronco	Big Bend

1 In Stock

$478.27 CAD

$573.92 CAD

Brand	K&N
Part #	K3377-1006KC
Condition	New
Warehouse	B

2023 Ram 2500 Intercooler Boot Kit 6 Cyl 6.7L Mishimoto

FACTORY-FIT BOOT KIT, FITS RAM 6.7L CUMMINS 2019+
FACTORY-FIT BOOT KIT, FITS RAM 6.7L CUMMINS 2019+
Product Attributes:
- SellingPoint04: Includes High-quality Constant Tension T-bolt Clamps
- SellingPoint05: Mishimoto Lifetime Warranty
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 2019+ Ram 6.7l Cummins
- TechSpec Maximum Temperature Rating: N/a
- SellingPoint02: Five Layers Of 100% Silicone For Maximum Durability And Blowout Prevention
- SellingPoint03: Duracore™ Technology Provides Superior Resistance To Heat, Pressure, Fuel, And Oil
- TechSpec Fits: 2019 Ram Cummins 6.7l
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (2) Hot-side Duracore Boots-- (2) Cold-side Duracore Boots-- (8) Constant Tension T-bolt Clamps--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: N/a
Features:
- Direct fit for the 2019+ RAM 6.7L Cummins
- Five layers of 100% silicone for maximum durability and blowout prevention
- DuraCore™ technology provides superior resistance to heat, pressure, fuel, and oil
- Includes high-quality constant tension T-bolt clamps
- Mishimoto Lifetime Warranty
Mishimoto is proud to expand their Cummins performance line to include a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 2019+ 6.7L Dodge Cummins. High-powered Cummins vehicles require Cummins performance products, which is why our boot kits are manufactured using DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this Cummins performance kit includes Mishimoto Constant Tension T-bolt Clamps for accurate and consistent holding power. The Mishimoto Cummins performance boot kit maintains factory fitment and like all of our Cummins performance parts, is protected by the signature Mishimoto Lifetime Warranty

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
2023 - Ram 2500	L	-	6 Cyl 6.7L	408

Brand	Mishimoto
Part #	M1NMMBK-RAM-19
Condition	New
Warehouse	B

UPC: 840197712207

2023 Toyota Tacoma Radiator 6 Cyl 3.5L CSF

05+ Toyota Tacoma (3.5L / 4.0L / 2.7L) High-Performance All-Aluminum Radiator
CSF manufactures the most advanced and efficient radiator in the industry for your 2nd/3rd Gen Tacoma. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
Product Attributes:
- Core Material: Aluminum
- Title: 05+ Toyota Tacoma (3.5l / 4.0l / 2.7l) High-performance All-aluminum Radiator
Features:
- 2-Row, 42mm Ultra-High Performance Radiator
- 6.5mm Tall Multi-Louvered Fins with CSF's Exclusive B-Tube Technology
- CNC Machined Mounting Brackets
- 100% All Aluminum TIG Welded Construction
- 2 Year Limited Warranty
- True "Drop-In" Fit with no Modifications Necessary
- Smooth Satin Finish
CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your 2nd/3rd Gen Tacoma running at its best, a CSF Heavy-Duty/High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on and off road, a heavy-duty performance radiator is a must-have for off-roaders, overlanders, and adventurers. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.The CSF 2nd/3rd Gen Tacoma radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Whether you are off-roading, towing, or just casually driving, trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.

This Part Fits the Following OEM/Substitute Numbers:

16410 0C180, 16410 0C190, 16410 0C420, 16410 0C430, 16410 0P030, 16410 0P040, 16410 0P290, 16410 0P300, 16410 AZ006, 16410-0C180, 16410-0C190, 16410-0C420, 16410-0C430, 16410-0P030, 16410-0P040, 16410-0P290, 16410-0P300, 16410-AZ006...VIEW MORE

Additional Fitment Information: