2010 Dodge Transfer Case Parts

Choose a Model for your 2010 Dodge


Showing 1 - 10 of 43 products
Image
SKU
Product
Rating
Price

Dorman
  • Transfer Case Shift Motor
  • Fits NVG246 Transfer Case
  • Product Attributes:
    • Package Contents: Motor Assembly
    • Wiring Harness Included: Yes
    • Terminal Type: Pin
    • Housing Material: Metal
  • Features:
    • Direct replacement - this transfer case motor fits and performs like the original motor on certain General Motors and Dodge trucks and SUVs
    • Confirm fitment - made for vehicles with the NVG246 transfer case
    • on GM vehicles, it corresponds with RPO code NP8, found in the glovebox
    • 100% new - this transfer case motor assembly is entirely new, not remanufactured like competitors, delivering optimal reliability
    • Trustworthy quality - backed by team of engineers and product experts in the United States and over a century of automotive experience
  • This transfer case shift motor directly replaces the motor found on select General Motors and Dodge Ram 1500 trucks with the New Venture Gear (NVG) 246 transfer case. On Cadillac, Chevrolet and GMC vehicles, it corresponds with RPO Code NP8, which can be confirmed in your vehicle's glovebox.

This Part Fits the Following OEM/Substitute Numbers:
19125571, 19125640, 48-113, 5170543AA, 88962314, SK600910

Additional Fitment Information:
Vehicle
2010 - Dodge Ram 1500

National Bearing
  • Ball Bearing
  • with New Process 243D Transfer Case with Part Time 4WD 2 Speed
  • National 207 Ball Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.040
    • Design: Single Row Radial
    • Width (Inch): 0.669
    • Outer Race Outside Diameter (Inch): 2.835
    • Outer Race Outside Diameter (MM): 72.000
    • Inner Race Radius (MM): 1.020
    • Inner Race Bore (Inch): 1.378
    • Inner Race Width (MM): 17.000
    • Inner Race Width (Inch): 0.669
    • Outer Race Width (Inch): 0.669
    • Outer Race Width (MM): 17.000
    • Bore (Inch): 1.378
    • Inner Race Bore (MM): 35.000
    • Outer Race Radius (MM): 1.020
    • Outside Diameter (Inch): 2.835
    • Outer Race Radius (Inch): 0.040
    • Part Description: Ball Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Ram 1500 Rear 4WD

Crown Automotive
  • Transfer Case Switch;
  • Transfer Case Switch
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Switch
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Sub Model
2010 - Dodge Ram 1500 TRX

Crown Automotive
  • NV271
  • Transfer Case Switch;
  • Transfer Case Switch
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Switch
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Sub Model
2010 - Dodge Ram 1500 TRX4

Crown Automotive
  • NV271
  • Transfer Case Output Shaft Bearing; Front;
  • Transfer Case Output Shaft Bearing
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Output Shaft Bearing
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position
2010 - Dodge Ram 3500 Front

Crown Automotive
  • For Use with NVG143 Transfer Case
  • Transfer Case Output Shaft Seal; Front;
  • Transfer Case Output Shaft Seal
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Transfer Case Output Shaft Seal
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position
2010 - Dodge Nitro Front

National Bearing
  • Ball Bearing
  • with New Process 243D Transfer Case with Part Time 4WD 2 Speed
  • National 207 Ball Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.040
    • Design: Single Row Radial
    • Width (Inch): 0.669
    • Outer Race Outside Diameter (Inch): 2.835
    • Outer Race Outside Diameter (MM): 72.000
    • Inner Race Radius (MM): 1.020
    • Inner Race Bore (Inch): 1.378
    • Inner Race Width (MM): 17.000
    • Inner Race Width (Inch): 0.669
    • Outer Race Width (Inch): 0.669
    • Outer Race Width (MM): 17.000
    • Bore (Inch): 1.378
    • Inner Race Bore (MM): 35.000
    • Outer Race Radius (MM): 1.020
    • Outside Diameter (Inch): 2.835
    • Outer Race Radius (Inch): 0.040
    • Part Description: Ball Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0009802115, 0009811625, 0019814125, 0023416207, 0029813025, 0039818725, 0049813125, 00625027-40, 01T-4812, 01T4818, 02466224, 03154, 040007, 040038, 04103TS, 04897981AA, 04897981AB, 051-3859...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Ram 1500 Front 4WD

National Bearing
  • Ball Bearing
  • with New Process 233D Transfer Case with Part Time 4WD 2 Speed
  • National 207 Ball Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.040
    • Design: Single Row Radial
    • Width (Inch): 0.669
    • Outer Race Outside Diameter (Inch): 2.835
    • Outer Race Outside Diameter (MM): 72.000
    • Inner Race Radius (MM): 1.020
    • Inner Race Bore (Inch): 1.378
    • Inner Race Width (MM): 17.000
    • Inner Race Width (Inch): 0.669
    • Outer Race Width (Inch): 0.669
    • Outer Race Width (MM): 17.000
    • Bore (Inch): 1.378
    • Inner Race Bore (MM): 35.000
    • Outer Race Radius (MM): 1.020
    • Outside Diameter (Inch): 2.835
    • Outer Race Radius (Inch): 0.040
    • Part Description: Ball Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Dakota Rear 4WD

National Bearing
  • Transmission Case Input Shaft Seal
  • with New Process 273 Transfer Case with Part Time 4WD 2 Speed
  • National 710652 Transmission Case Input Shaft Seal
  • Product Attributes:
    • Shaft (Inch): 2.1260
    • Sealing Material: Fluoro-elastomer
    • Width (Inch): 0.4370
    • Flanged Outside Diameter (Inch): 3.1338
    • Inside Diameter:
      • 2.1260
      • 54.000
    • Flanged Outside Diameter (MM): 79.600
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.875
    • Outside Diameter:
      • 2.879
      • 73.120
    • Outside Diameter (Inch): 2.879
    • Shaft (MM): 54.000
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
05086315AA, 21239, 5086315AA, 710652, F81A-7B215AA, F81Z-7B215AA

Additional Fitment Information:
Vehicle Drive Type
2010 - Dodge Ram 3500 4WD

National Bearing
  • Oil Seal
  • with New Process 243D Transfer Case with Part Time 4WD 2 Speed
  • National 3946 Oil Seal
  • Product Attributes:
    • Shaft (Inch): 1.875
    • Sealing Material: Nitrile
    • Width (Inch): 0.485
    • Redicoat: Yes
    • Flanged Outside Diameter (Inch): 3.000
    • Inside Diameter:
      • 1.875
      • 47.630
    • Flanged Outside Diameter (MM): 76.200
    • Helix Type: Bi-directional Lip Design
    • Unit of Dimension: Inch
    • Housing Bore (Inch): 2.750
    • Outside Diameter:
      • 2.754
      • 69.950
    • Outside Diameter (Inch): 2.754
    • Shaft (MM): 47.630
    • Part Description: Oil Seal
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

This Part Fits the Following OEM/Substitute Numbers:
04167735, 04762899, 04798125, 05938609, 12384477, 14095610, 15580381, 18662, 18758, 1L24-7B215HA, 3946, 4167735, 4167930, 4318662, 4338968, 4412990, 4505469, 47583...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2010 - Dodge Ram 1500 Front 4WD
Showing 1 - 10 of 43 products

Loading...